Product category:
Cutting lubricants, coolants, systems and treatment
News Release from: Master Chemical Europe | Subject: TRIM E805 cutting and grinding fluid
Edited by the Manufacturingtalk Editorial
Team on 23 December 2005
Cutting and grinding fluid is
aero-approved
Within weeks of its release, a cutting and grinding fluid that does not use chlorinated or sulphurised extreme pressure additives, received full approval by a UK-based aero engine manufacturer.
Within weeks of its release, Master Chemical Europe's new TRIM E805 cutting and grinding fluid had received full approval by a UK-based aero engine manufacturer The machining requirements of this market are very similar to those of the medical equipment sector and this latest addition to the TRIM range brings significant performance benefits to both
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
Surface and edge grinding machines cleaned up
Cleaner machine tools, prolonged coolant life and lower operating costs are the three main benefits of switching to TRIM C270 synthetic coolant.
Coolant cleans up surface and edge grinding
Cleaner machine tools, prolonged coolant life and lower operating costs are three main benefits experienced by Stanley Tools since making the switch to TRIM C270 synthetic grinding coolant.
This universal soluble oil provides excellent chemical and mechanical lubricity without using costly and environmentally damaging chlorinated or sulphurised extreme pressure additives.
This tried and tested formula also controls built-up edge in tough operations.
It assures long operational life for consistently high quality parts manufacturing and requires minimal maintenance even in demanding fluid management systems.
Extremely hard water tolerant, TRIM E805 has the ideal balance of cooling and lubrication to provide exceptional tool life when used on exotic materials such as inconel and titanium as well as the common aerospace aluminiums.
Its fine particle size reduces carry-off and ensures easy transfer to the point-of-cut.
This product has a low odour and is low foaming in high-pressure applications - even in soft water.
It protects both machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
Very clean running and with superb resistance to biological attack, TRIM E805 is easily removed with water, working solution or aqueous cleaners.
Naturally, this latest TRIM fluid is fully compatible with the XYBEX range of recycling equipment and systems.
• Master Chemical Europe: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
