Product category:
Cutting lubricants, coolants, systems and treatment
News Release from: Master Chemical Europe | Subject: TRIM E708 universal cutting fluid
Edited by the Manufacturingtalk Editorial
Team on 16 June 2006
Universal cutting fluid tolerates hard
water
Low-foaming and extremely hard water tolerant, a universal fluid for multi-metal job shops can be used to machine a wide range of ferrous, non-ferrous and non-metallic materials.
Master Chemical has again extended its European CHIP 3 classification family of cutting and grinding fluid concentrates The new addition is TRIM E708 whose consistent performance belies its low cost
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
Surface and edge grinding machines cleaned up
Cleaner machine tools, prolonged coolant life and lower operating costs are the three main benefits of switching to TRIM C270 synthetic coolant.
It is low-foaming and extremely hard water tolerant.
Also as this a very effective biocidal package, it promises an exceptionally long sump life.
This new TRIM product is the ideal universal fluid for multi-metal job shops.
It can be used to machine a wide range of ferrous, non-ferrous and non-metallic materials.
In common with other recent additions to the Master Chemical fluid range, TRIM E708 is classified as non-hazardous in accordance with CHIP 3 regulations.
It contains no nitrites, secondary amines or phenolics.
Neither does the formula contain sulphur or chlorine as an EP additive.
Naturally, TRIM E708 is formulated for recycling.
Good tramp oil separation is assured without significant change in emulsion characteristics.
• Master Chemical Europe: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
