Product category:
Cutting lubricants, coolants, systems and treatment
News Release from: Master Chemical Europe | Subject: Metalcutting fluid for machining magnesium
Edited by the Manufacturingtalk Editorial
Team on 22 September 2006
Metalworking fluid eases magnesium
machining
Although magnesium alloys are easy to machine, the process requires careful management and this metalworking fluid extends sump life and avoidsresidue build-up.
Magnesium is widely recognised for its favourable strength-to-weight ratio and eminent suitability for casting It is rarely used in pure form for structural elements and is generally alloyed for the production of parts for the automotive, aerospace and electronic sectors
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
Surface and edge grinding machines cleaned up
Cleaner machine tools, prolonged coolant life and lower operating costs are the three main benefits of switching to TRIM C270 synthetic coolant.
Coolant cleans up surface and edge grinding
Cleaner machine tools, prolonged coolant life and lower operating costs are three main benefits experienced by Stanley Tools since making the switch to TRIM C270 synthetic grinding coolant.
Magnesium alloys are amongst the easiest of the structural metals to machine.
They require the least power of any commonly machined metal, for example, 50% less than aluminium alloys and 90% less than nickel and cobalt based super alloys.
Indeed they can be shaped and fabricated by most metalworking processes and are easily welded.
It is not all 'plain sailing' however as a subcontractor to a major magnesium die-caster can confirm.
Although it agrees that magnesium alloys are easy to machine, the process requires careful management.
Inappropriate choice of metalworking fluid can cause a number of production problems and for this particular subcontractor these included short sump life, residue build-up and inefficient pump-out and recharge.
The odour of the fluid also prompted a lot of operator complaints so health and safety was an issue too.
With these prevailing problems the company was keen to trial the new dedicated coolant developed by Master Chemical, TRIM E737.
It has been developed as a cost competitive product that is compatible with virtually all magnesium alloys up to 4000 ppm.
It has been formulated to provide exceptionally clean running and to maintain tool sharpness for optimal cutting.
The results were impressive.
As TRIM E737 virtually eliminates hydrogen generation, the residue build-up the subcontractor had been experiencing with its previous water-based fluid disappeared immediately.
The product's extreme hard water tolerance also had a positive effect in this regard.
As a result machines became cleaner allowing easier part changes and maintenance.
The excellent bio-stability of TRIM E737 proved over the length of the trial to provide a long sump life without the need for any additive.
Complaints about the smell of the product were eliminated and coolant disposal costs were cut by a substantial 40%.
"By changing to TRIM E737 we have reduced our operating costs per machine," confirmed a company spokesman.
"This product is affordable, effective and has helped reduce production costs for a significant part of our business.".
• Master Chemical Europe: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
