Product category:
Thermal and weld hardfacing, coating and overlaying
News Release from: Metalock Engineering | Subject: Thermal metal spraying and orbital machining
Edited by the Manufacturingtalk Editorial
Team on 25 August 2006
Machining and thermal spraying repairs
bearing
A combination of orbital machining and thermal spraying was used to repair a suspect bearing on one of a food manufacturer's sterilizer units, in the space of one long weekend.
The backbone of the baked bean production process is sterilization of the finished product in sealed tins and any breakdown in the plant used could have very serious consequences As a result processors pay a great deal of attention to regular maintenance checks of all their critical equipment
This article was originally published on Manufacturingtalk on 2 Dec 2004 at 8.00am (UK)
Related stories
Orbital machining expertise keeps bar mill active
A journal failure on a cement plant bar mill was quickly cured using orbital machining and installation of a new white metal bearing, so significantly reducing downtime.
Hearth shell bores machined in-situ
As part of a complete blast furnace rebuild programme Metalock machined fifteen hearth shell bores on site at the furnace to accommodate tapered tuyere cooler holders.
Recently, a leading processor found a suspect bearing on one of its sterilizer units and if previous experience was anything to go by there was a high chance that a new drive shaft would need to be fitted fairly early to return the machine to production.
This had been undertaken on other units previously and proved to be a rather expensive option, both with regard to downtime and replacement shaft costs.
The sterilizer plant suppliers in Belgium, FMC, have been using Metalock Engineering UK in Coventry to repair worn shafts for a considerable time.
Further reading
Double barrel extruder's bores reground in-situ
A special purpose grinding machine reground the bores of a double barrelled extrusion machine to restore parallelism and roundness along part of their length.
Robot welding line sparks productivity gains
GKN Autostructures of Telford has installed a new automated manufacturing facility for the assembly of Ford Transit front suspensions, steering arms, dead beams and side members.
When FMC heard that their customer might have a problem they recommended contact with Metalock.
They visited the processing plant and after assessing the situation proposed a cost effective solution - a combination of orbital machining and thermal spraying.
This was accepted.
Over a long weekend, the sterilizer was partly stripped to clear space on the drive shaft and allow Metalock engineers to set up their orbital turning equipment.
The journal area of the shaft was then machined down to 115mm diameter by 90mm long and the thermal spraying system installed.
Sufficient metal was then deposited on the machined area to permit a final orbital turning operation and restore the shaft's original 125mm diameter to accept a new tight fit SKF bearing sleeve.
Within four days of being shut down, the sterilizer was back in operation.
Had the shaft replacement option, which normally takes up to 10 days to complete, been chosen, the cost would have been in the region of GBP 25,000.
Doing it the Metalock way, the repair cost was halved and was completed in half the time.
Metalock Engineering is one of the leading specialists in thermal spraying which can be used to effectively repair and recondition, provide an anti-corrosion or heat shield surface, prevent erosion or provide insulation.
Metalock's team of highly trained specialists operate in the company's workshops in Coventry or on site, as the task demands and have the skills to achieve high specification results on all types of components.
Typical deposited materials include steel, tungsten carbide, chrome carbide, ceramics and plastics and these are deposited using high velocity oxygen fuel(HVOF), flame spraying, arc spraying or plasma spraying techniques.
• Metalock Engineering: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
