Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Mitsubishi Electric Automation Systems | Subject: FR-FR700 series of drives
Edited by the Manufacturingtalk Editorial
Team on 20 December 2006
Dust and splash-proofed drives
The high-efficiency FR-FR700 series of drives from Mitsubishi has now been extended to include a new range of dust and splash-proofed drives for the building services sector.
The high-efficiency FR-FR700 series of drives from Mitsubishi has now been extended to include a new range of dust and splash-proofed drives for the building services sector - the IP54 rated FR-F746 series With the same high performance as the rest of the power-saving FR-F700 models, the FR-F746 is aimed at the fit-and-forget heating, ventilation and air conditioning sector
This article was originally published on Manufacturingtalk on 4 Aug 2008 at 8.00am (UK)
Related stories
Large fans save on heating energy costs
Fans are often regarded as excessive energy users rather than energy savers, but companies using MegaFan's 24ft high volume low speed fans reported gas bill savings exceeding 50%.
Mitsubishi uses iQ for production integration
Mitsubishi Electric's iQ PAC (programmable automation controller) can now integrate all production processes, including robots in a single, interdisciplinary, automation platform.
The IP54 rated construction provides protection from the ingress of dust and water splashes without the need and additional cost of a protective cubicle.
What's more, its long service life and minimal maintenance requirements make the drive the ideal choice for sites and plant rooms where access is difficult.
Ideal for building services automation applications and commercial fan and pump control, the FR-F746 series spans the range 0.75 - 55 kW, with frequency output control from 0.5hz up to 400 Hz, and incorporates a wide range of control options such as 15 pre-selected speeds, digital and analogue speed setting.
Further reading
PACs keep production moving
It is now possible to build a redundant network out of standard hardware and increase the operational availability of any production system, writes Jeremy Shinton.
Low cost PLC usage diversifies widely
A low cost programmable controller has such features as analogue inputs, PID control loop, real time clock and GSM modem facilities, as well as simple function block programming.
The drive also includes an automatic energy-saving function across the speed range.
Crucially, it achieves the most dramatic energy savings in the important low-speed range and even manages to give optimum savings throughout the acceleration and braking cycles.
For example, at a starting frequency of 35 Hz, the inverter achieves 57 percent power saving compared to conventional drives.
In addition, the Optimum Excitation Control (OEC), a Mitsubishi innovation, achieves an average of 10 percent further saving by ensuring that the optimum flux is delivered to the motor at all times.
Suitable for a 3-phase power supply from 380 to 500 volts, the FR-F746 is very easy to set-up and configure, using the one-touch digital dial, yet incorporates extensive control and data features as standard.
The accurate PID speed control meets the technical requirements for a host of applications in the food and beverage, printing and paper, chemicals, textiles and wood industries.
The FR-746 variable speed drive also includes a service interval timer to optimise the availability of external equipment, meeting a wide range of customer requirements.
LonWorks communications is increasingly becoming the norm for building services, yet is just one of the many communications protocols available.
The drive also includes communication option cards for Profibus DP, CC-Link, Modbus RTU and DeviceNet fieldbuses as well as having an RS-485 interface as standard.
In offices where noise transmission of can be a problem, the drive gives whisper-quiet motor running, thanks to its high, adjustable PWM switching frequency, The FR-F746 drive is simple to install, incorporating it's own integrated EMC filter (EN 55011A) for RF suppression.
Primarily, the FR-F746 is designed for a host of applications in building services automation; for smoke extraction fans, hot air generation systems, heat pumps, heating and drying cabinets and re-circulating air-heating systems. Request a free brochure from Mitsubishi Electric Automation Systems ...
• Mitsubishi Electric Automation Systems: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
