Product category:
Drilling, boring and reaming
News Release from: Mitsubishi Carbide | Subject: MPS carbide drills
Edited by the Manufacturingtalk Editorial
Team on 01 January 2008
Deep hole drilling at high penetration
rates
Carbide drills for drilling holes up to 30 x diameter have a 'wave' type cutting edge for improved penetration and a decrease in tooling load.
Specially developed, ultra high performance MPS carbide drills for standard and deep holescan drill from 3 x diameter (D) to 30xD MPS drills have a 'wave' type cutting edge for improved penetration and a decrease in tool load, especially fpr when drilling extra deep holes
This article was originally published on Manufacturingtalk on 19 Nov 2007 at 8.00am (UK)
Related stories
Aluminium alloys milled at high removal rates
Multi-functional cutters offer metal removal rates in aluminium alloys of up to 10,000 litre/min owing to rigid tool body, ultra secure insert clamping and the geometry of carbide inserts.
Additionally, a new double margin flute is the latest feature to provide the highest accuracy, smooth chip evacuation and smooth surface finishes, said Mitsubishi.
Due to the novel design and the wave type cutting edge geometry and the all-important through coolant holes, Mitsubishi said that MPS is capable of incredible cutting performances even at the highest speeds and feeds.
The use of the highly wear and oxidation resistant 'Miracle Coating' achieves long tool life at extreme feed rates or during high temperature conditions experienced during deep drilling operations.
This range of drills achieves state of the art performance and hole precision even under the toughest cutting conditions.
MPS drills are available in diameters from 3.0 - 20mm (up to 3xD holes), and up to 30xD for diameters up to 8mm.
• Mitsubishi Carbide: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
