Product category:
CNC turning centres, mill/turning, multi-tasking centres, horizontal and VTLs.
News Release from: Mills Manufacturing Technology | Subject: Nakamura Tome 7-axis CNC mill-turning centres
Edited by the Manufacturingtalk Editorial
Team on 08 August 2002
One-hit machining gains more aerospace
work
It is impossible to manufacture aerospace components economically these days without minimising the number of separate machining operations, one-hit production being the goal.
It is impossible to manufacture aerospace components economically these days without minimising the number of separate machining operations, one-hit production being the goal Mindful of this, last year Nottingham-based subcontractor, Doughty Precision Engineering (DPE), doubled its number of Nakamura Tome 7-axis CNC mill-turning centres to four
This article was originally published on Manufacturingtalk on 23 May 2001 at 8.00am (UK)
Related stories
Machining times cut by three-quarters
It used to take Watford-based Parker Hannifin 30 minutes to machine both ends of complex cylinder rods. The same job is now done in seven minutes in a Nakamura Tome TW-20, twin-turret lathe.
Two opposing twin-turret lathes are in one
One of the most capable mill-turning machines ever built, has four turrets, two spindles and offers a total of 13 computer controlled axes.
Supplied by Mills Manufacturing Technology, the machines are devoted to the production of electrical connector parts for the aerospace industry from stainless steel bar up to 65mm diameter.
Called receptacles, the components are milled and drilled on the Nakamura Tome lathes for about 50 per cent of the cycle time.
The only subsequent operations needed are keyway machining on a CNC slotter and deburring using a boring bar on an older CNC lathe that no longer performs mainstream production duties.
Further reading
Small horizontal as rugged as the big models
Although the new Daewoo ACE HM500 horizontal machining centre is nominally a half-metre-cube machine, it is constructed using box section guideways normally found on larger machines
VMC machines vaporiser bodies from extruded stock
Anaesthesia equipment manufacturer, Penlon, is using a Daewoo vertical machining centre to produce vaporiser bodies from aluminium extrusions in-house.
HMCs minimise non-cutting time and are accurate
Exceptional value is claimed for the Daewoo ACE HP Series of horizontal machining centres from Mills Manufacturing Technology.
Simultaneous front- and reverse-end machining minimises the cycle time, which is set by the sequences needed to complete the front end.
Then after part-off and synchronous pick-up by the right hand spindle, as much milling as possible is completed from the back as the turning operations are fairly limited.
The benefit the Nakamura WT machines offer is that both turrets can work on either right or left spindle to ensure minimum total cycle times with maximum throughput.
During the mid 1990s, DPE was finding that repeated 'cost-down' requirements from aerospace customers were eroding margins to the point where jobs were becoming financially unviable.
So in 1997 it started down the twin-opposed-spindle mill-turning route with the purchase of two Nakamura Tome WT-20s.
It is the latest generation of this lathe, the WT-250, that was installed last year (2001).
Mills part-exchanged one of the existing WT-20s under the flexible finance package it offers, so DPE now operates three WT-250s and one of the original lathes.
Under normal trading conditions the machines run 24 hours a day, but since September 11th this has been cut to 100 hours per 5-day week.
DPE is sure that the volumes will return as the aerospace industry picks up and confidence levels improve.
Founded in 1925 by Alan Doughty, grandfather of the current owner, Peter, DPE originally specialised in manufacturing diesel fuel injector parts for locomotive engines, an area that still forms part of the business today, as does work for the motorsport industry.
However aerospace contracts, principally for the Amphenol group of companies, now accounts for the majority of the subcontractor's business.
Around half of turnover is generated in the UK with the remainder accounted for by a recent export contract awarded by Amphenol headquarters in the USA.
Winning the latter business prompted investment in the extra Nakamura Tome machines, as the US contract increased throughput at the Nottingham subcontract facility by 100 per cent to 20,000 parts per month.
A problem for DPE, however, is the large variety of receptacle permutations; there are 10 sizes and five keyway varieties per family of connector and a total of 800 part numbers overall.
Said Peter Doughty, "We are locked into a price irrespective of how many connectors we produce.
As the parts are relatively low cost and the material accounts for around 20 per cent of the finished component price, an ideal batch size for us is 1,000-off.
Smaller quantities are less economic; and we do not gain much on larger runs.
So we have adopted the policy of producing for stock receptacle blanks that are nine tenths complete, then finish-machining them according to the permutation and quantity ordered by the customer." He continued, "For the size of component we are producing the WT-250s are big machines, but we find we need this physical size as it translates into high rigidity and hence component quality.
Furthermore it enables us to use the correct feeds and speeds for the material - mainly 303, 304 and 316 stainless steel - without compromising accuracy, so throughput rate is high." DPE also operates five Daewoo lathes from Mills, the latest being a Puma 230MC large bore CNC turning centre with live tooling purchased last year.
All are equipped with Multifeed short bar magazines, as are the Nakamura Tome lathes.
The 3-axis Daewoo machines perform a variety of less complex, single operation turning jobs including production of plug shells that fit on top of the receptacles to complete the connectors.
Other materials regularly machined by the subcontractor include mild steel, titanium, nickel and aluminium alloys up to 75mm diameter for bar, 350mm diameter when chucking.
(This was Manufacturingtalk's Top Story on 7 August 2002).
• Mills Manufacturing Technology: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
