Product category:
Measurement systems
News Release from: Malvern Instruments | Subject: Particle size data measuring system
Edited by the Manufacturingtalk Editorial
Team on 26 September 2006
Particle size data helps optimize ball
milling
Implementation of a novel control strategy, underpinned by on-line particle size data measured, has transformed ball milling process efficiency at a metal powder production facility.
Implementation of a novel control strategy, underpinned by on-line particle size data measured using a Malvern Insitec, has transformed process efficiency at a metal powder production facility Prior to installation of the new system large fluctuations in particle size were a regular occurrence and the particle size distribution of the finished product was very broad
This article was originally published on Manufacturingtalk on 9 Jan 2008 at 8.00am (UK)
Related stories
Control particle size, measurement and moisture
Two companies will be showing the latest developments in particle sizing systems for solids processing and infrared sensors for on-line measurement and control of moisture and composition.
Particle measurement aids paint performance
Instrument performs zeta potential and particle size measurement in developing the use of nanosized ceramic particles to enhance scratch resistance for automotive lacquers.
With the new control strategy in place, particle size is controlled effectively and automatically.
A 75% reduction in particle size distribution width has been achieved, mill throughput has been increased and manpower requirements have been dramatically reduced.
The mill is now operating close to its performance limits.
Mill loading is a particular issue at the site as the metal granulate feed is so light.
Conventional mill fill measurement methods are not appropriate and the mill can be easily over-filled.
The downstream fluctuations directly impact product quality.
With the implemented control strategy throughput is automatically manipulated in response to particle size.
If particle size is too low throughput is increased and vice-versa.
Product from the mill is separated using a classifier that returns oversized material.
A second control loop manipulates the speed of this classifier to maintain a set recycle flow rate.
The two loops work in tandem to deliver vastly improved overall performance.
Automated control loops are only possible if the required variables can be consistently and reliably measured.
The Insitec particle size analyzer is designed specifically to meet the requirements of continuous industrial operation.
It has extremely high reliability, requires little maintenance, needs no calibration and is easily integrated with existing plant. Request a free brochure from Malvern Instruments ...
• Malvern Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
