Product category:
Materials Testing
News Release from: Metrohm UK | Subject: Line analyser
Edited by the Manufacturingtalk Editorial
Team on 15 January 2007
Line analyser follows titrators
The Process Lab is a new AT Line Analyser to follow on in the success of the Titrando range of Laboratory Titrators.
The Process Lab is a new AT Line Analyser to follow on in the success of the Titrando range of Laboratory Titrators The system uses well established hardware and software, including the Titrando Titrator and Tiamo Software
This article was originally published on Manufacturingtalk on 31 Jul 2007 at 8.00am (UK)
Related stories
Titrator sends info to process control systems
An at line analyser automatically analyses plating baths for content, such as copper, nickel and zinc, as well as baths used for cleaning and degreasing.
The advantages to the process industry, are the Industrial PC and I/O controller, for sending of information to Process Control Systems also the Process Lab can be used at several different points in the manufacturing process.
The system will automatically analyse pH, acid value and salt content.
The Processlab can be equipped with a high speed homogenizer for dissolution of solid samples as well as a hot water to help dissolve powders eg Instant soup.
Typical analysis for these are pH, acid value, Chloride content as well as such parameters as Vitamin C value.
All of this analysis is carried out in the Process Lab, without operator intervention, and results are relayed to the process controller so remedial action or pass / failure for product quality is regulated automatically. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
