Product category:
Materials Testing
News Release from: Metrohm UK | Subject: Compact sensor for photometric titration
Edited by the Manufacturingtalk Editorial
Team on 01 March 2007
Compact sensor for photometric titration
Metrohm discusses visual indication with coloured indicators as the oldest method for recognising the endpoint of the titration; and still frequently used today.
Visual indication with coloured indicators is certainly the oldest method for recognizing the endpoint of the titration; and is still frequently used today It can be realised without any complicated instrumentation and at a low cost
This article was originally published on Manufacturingtalk on 6 Mar 2006 at 8.00am (UK)
Related stories
Compact sensor for photometric titration
Titration with photometric endpoint recognition is applied in a large number of titration methods.
Photometric titration has compact sensor
Spectrosense, a compact sensor for photometric titration Titration with photometric endpoint recognition, is applied in a large number of titration methods.
Coloured indicators react with the analyte: a small amount of indicator is added at the start of the titration and together with the analyte, forms species A.
When the analyte has almost completely reacted with the titrant, the titrant displaces the indicator from species A which releases the indicator.
This takes place with a change in colour (in acid - base titrations phenolphthalein reacts with protons to give a colourless substance.
Further reading
Process chemicals can be analysed on-line
Metrohm has combined the best aspects of laboratory and online systems to produce the 875 ProcessLab: a fully customised, automated at-line system for analytical testing.
Determining water levels in lubricating oils
It is impoirtant to determine the presence of water in machinery lubricating oils, which is why Metrohm is offering its 831 KF Coulometer to give reliable results over a long period.
Under alkaline conditions the proton is split off and the colour changes to red - violet).
Coloured indicators react with the titrant: a small amount of indicator is added at the start of the titration.
It does not react with the analyte, and the colour remains unchanged until the first excess titrant is present.
The titrant combines with the indicator.
This takes place with a change in colour.
If the correct indicator is chosen then good results are obtained.
The chief disadvantage of this method is that it cannot be automated and cannot be validated.
(The colour sensitivity differs from person to person and also depends upon the lighting conditions.
In addition, difficulties occur with coloured and/or turbid solutions).
Photometric indication can bring an improvement.
The (individual) human eye is replaced by a (neutral) sensor.
The method can be automated and validated - provided the correct colour indicator is chosen and that the solutions are not too turbid or no intense turbidity occurs during titration.
Coloured indicators do not have a transition point - they have a transition range.
This fact can considerably influence the correctness of the results of titrations with visual endpoint recognition.
An empirical rule is that the human eye recognises a change in colour when the concentration ratio of the two indicator species changes from a ratio of e.g 1/10 to 10/1.
For pH indicators this means that the pH must have altered by two units.
A compact sensor for photometric titration is the new Metrohm Spectrosense The Metrosensor Spectrosense benefits from the advantages of photometric titration in an optimal way.
Depending on the application, you choose one of the two wavelengths available, 523 nm or 610 nm.
Modern LEDs serve as the light source; they have an average operating time of 50 000 hours and their light intensity remains high even after long operating times.
The new Spectrosense is not only outstandingly robust, it is also very easy to handle.
It can be connected to a Metrohm Titrino or Titrando like an ordinary electrode.
Power is supplied from the stirrer connection of the Titrino or the MSB connection of the Titrando.
If required, an external power adapter can also be used. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
