Product category:
Materials Testing
News Release from: Metrohm UK | Subject: Plastic moisture content
Edited by the Manufacturingtalk Editorial
Team on 15 June 2007
Plastic moisture content during
processing
The 832 Thermoprep in conjunction with an 831 coulometer from Metrohm UK is suitable for the determination of plastic moisture content during processing.
The determination of the moisture content of plastics during processing is crucial This analysis can be performed on the resin, preform or bottle to determine if excessive moisture is present
This article was originally published on Manufacturingtalk on 22 May 2008 at 8.00am (UK)
Related stories
Process chemicals can be analysed on-line
Metrohm has combined the best aspects of laboratory and online systems to produce the 875 ProcessLab: a fully customised, automated at-line system for analytical testing.
The effectiveness of dryers can also be checked.
PET, for example, must be dried to very low levels (40ppm) prior to processing.
Processing problems and defects such as haziness, voids and streaks coupled with a fall in IV (Intrinsic Viscosity) may result in undesirable mechanical properties of the bottle.
To maintain quality throughput PET is dried for 4-6 hours at 160C - 180C, with an air dew point of <-40C.
Moisture content in PET is determined using the Karl Fischer Titration method where a sample is heated in a specially designed oven at 190C.
Inert gas (Nitrogen or Argon) passes over the sample and any moisture evolved from the heating is carried over into a coulometeric KF cell where it is titrated.
The level of water is determined automatically.
The 832 Thermoprep in conjunction with an 831 coulometer from Metrohm is perfect for this application, and for moisture determination of other solids and difficult samples.
This method gives a very accurate means of measuring the water content.
Other techniques for measuring moisture content involving weight loss measurement may lead to false readings as other non water based compounds can be boiled off from the PET. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
