Product category:
Maintenance planning, services and equipment
News Release from: Moog Controls | Subject: Machinery support
Edited by the Manufacturingtalk Editorial
Team on 11 June 2007
Machine breakdown repair saves weeks of
downtime
Moog fitted a new controller to an Ovenable Board packaging machine for Coppice Alupack, saving a possible six-weeks of downtime.
Following a machine breakdown, packaging company Coppice Alupack had to react quickly otherwise it was faced with the possibility of six-weeks downtime, and the potential of causing difficulties in a tight supply chain with a major account That was until Moog stepped in and helped fix the problem in five days
This article was originally published on Manufacturingtalk on 25 Apr 2008 at 8.00am (UK)
Related stories
Moog drives package is multi-axis
Moog has introduced an advanced multi-axis motion control and servo drive package, which combines ndividual MSD servo drives with an MSD motion controller for up to 30 axes.
Interface hydraulic valve has digital control
Interface valve is an advanced hydraulic valve with microprocessor-based electronics and various fieldbus interfaces and is easy to install.
The machine in question is used to mould and shape Ovenable Board, a food packaging medium that can withstand heat of 220degC for a whole hour.
"Ovenable Board is made using a machine equipped with hydraulic equipment that has been in operation for a number of years," explains James Lamin, engineering manager at Coppice Alupack, "and there are only two or three such machines in the country ".We had a major breakdown, when the hydraulic controller failed," he reveals ".
We faced a difficult situation as we could not get any quick support from the incumbent hydraulic equipment supplier and there where no spares available for several weeks.
Further reading
Cartridge valve permits high-density fitting
The cartridge design permits high-density fitting for applications where multiple valves are required to be mounted on a single manifold or in industries where weight and space are at a premium.
Hydraulic technology for model testing in Norway
Moog Controls has recently supplied advanced hydraulic technology to Marintek, a Norwegian Marine Technology Research Institute, located in Trondheim, Norway.
Digital interface valve enhances roll levelling
A machine that levels coiled high strength low carbon steel strip has a hydraulic digital interface valve to individually control seven levelling roll positioning axes and improve levelling quality.
"They could only offer to re-program and fit a new model controller and were talking of six week lead-times.
At this stage we went back to the original machine manufacturer who introduced us to Moog, who they regarded as a pretty responsive company ".
We were fortunate as Simon Furnell of Moog had in-depth knowledge of the original design of this machine.
Indeed, he was contacted on a Wednesday and, along with the original machine supplier and a third party independent hydraulics company, we sat down on site and investigated the problem on the Thursday, placed orders on Friday, worked over the weekend to rewire the machine for the Moog MSC controller and on the Monday Simon wrote the program for the controller.
By Tuesday evening, the machine was back up and running at approximately 80 percent capacity and we were able to resume production.
We chose to let things settle for a few weeks before fine tuning the parameters to get the machine back up to full capacity.
"Simon and his colleagues then came back and finished the installation, which included fitting a new HMI panel.
This provided easier operation and allowed the operators to change settings more easily than the old HMI".
The basic hydraulic valves and mechanical components did not need changing, as Moog's MSC controller was fully compatible with the existing system.
One added bonus of the reprogramming task was that it allowed modifications to improve the machine's operation.
In particular, the machine previously relied on reaching a set tonnage before returning the hydraulic cylinder to the top of its stroke.
Moog's MSC controller now allows both tonnage and distance settings.
"This gives us better control during the forming of the container and builds in a certain safety limit in order to counter the effect of excess tonnage at the wrong point in a stroke," continues Lamin.
"The MSC controller knows that if that happens, there may be something left in the tool and returns the press back to its home position.
The Moog HMI is also a lot clearer to use and we are able to enter preset parameters and save them.
The operator can now just call up a tool from the library and all the settings are updated automatically.
This makes changeovers much quicker as well - previously the operator would have to keep a manual log of about 20 settings and have to type them back in".
The original controller used custom-written software that was not Windows-compatible.
Now Moog's Windows-based software allows Coppice to plug in a standard laptop PC, providing much improved diagnostics and fault-finding.
Lamin recalls being able to adjust the control parameters on site, while being guided through the changes over the telephone by Moog's Furnell.
Lamin concludes: "The team we put together both internally and externally certainly did a super human job.
Coppice Alupack prides itself on our responsiveness to our customers.
It was good to be involved with similar minded companies, as had Moog not been able to support this effort with both their resource and technical solutions to our problem, we would probably have had to deal with the consequences of not being able to get back to production in the time that we did". Request a free brochure from Moog Controls ...
• Moog Controls: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
