Product category:
Adhesives and adhesive bonding equipment
News Release from: Master Bond | Subject: UV15-7 UV curable polymer
Edited by the Manufacturingtalk Editorial
Team on 04 January 2005
UV-curable adhesive/coating is optically
clear
A one component, optically clear, non-yellowing UV curable polymer is a 100% reactive system that produces tough, durable bonds and does not contain any solvents or other volatiles.
A new one component, optically clear, non-yellowing UV curable polymer called UV15-7 has been introduced by Master Bond, Hackensack, New Jersey, USA This 100% reactive system does not contain any solvents or other volatiles
This article was originally published on Manufacturingtalk on 18 Jun 2008 at 8.00am (UK)
Related stories
Adhesive cures very quickly at room temperature
Master Bond has developed an exceptionally fast curing two component epoxy adhesive for general purpose bonding and develops high bond strength exceeding 140kg/cm2 at room temperature.
When exposed to a source of UV light of adequate wave length and intensity it cures almost instantaneously.
It is not inhibited by air and cures at room temperature.
Master Bond UV15-7 produces tough, durable bonds.
It has excellent adhesion to many different substrates ranging from glass and iron to polyester films and polycarbonates.
UV15-7 offers superior chemical resistance and electrical insulation properties.
Upon cure, it has a shore D hardness of 60 and an elongation of 6-8%.
UV15-7 is a low viscosity liquid and is easy to apply.
It is available in 1/2 pint, pint, quart, gallon and 5 gallon containers.
For ease of application it is also available in syringe applicators. Request a free brochure from Master Bond ...
• Master Bond: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
