Product category:
Adhesives and adhesive bonding equipment
News Release from: Master Bond | Subject: EP44 two component epoxy adhesive
Edited by the Manufacturingtalk Editorial
Team on 15 February 2008
Epoxy 'Super Glue' offers 3 minute set
A two component epoxy adhesive sets in 3 min for high performance general purpose bonding and cures in a few hours at ambient temperatures to develop a high bonding shear strength.
Master Bond has introduced the EP44 two component epoxy adhesive with a fast '3 minute' set for high performance general purpose bonding Master Bond Polymer Adhesive EP44 gels in about 3 minutes and cures within a few hours at ambient temperatures to develop a high bonding shear strength of more than 3150 lb/in2
This article was originally published on Manufacturingtalk on 20 Oct 2004 at 8.00am (UK)
Related stories
Epoxy glues glass, polycarbonates and acrylics
Master Bond, Hackensack, NJ has introduced EP30P a new two component, transparent, low viscosity epoxy system for high performance bonding, se
Low viscosity potting compound is flexible
A new flexible, tough epoxy potting and encapsulation compound has extraordinarily low viscosity and is easy to apply.
It can be used in thick and thin cross sections.
The bonding strength is relatively insensitive to cleaning procedures.
EP44 Bonded parts can be safely handled within a half hour.
It produces durable high strength and tough bonds which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents, over the exceptionally wide temperature range of -50 deg C to more than 120 deg C.
* Wide variety of materials - Master Bond EP44 adheres well to metals, glass, ceramics, wood, vulcanized rubbers and many plastics.
The hardened adhesive is a superior electrical insulator (volume resistivity, >1015 ohm-cm).
It is recommended for use in the electronic, electrical, computer, construction, metalworking, appliance, automotive and chemical industries.
It is suggested that Master Bond EP44 be mixed in small quantities because of its fast gelling properties.
It is highly recommended for production line assemblies and high speed bonding operations.
* About Master Bond - Master Bond is a manufacturer of high performance adhesives, sealants, coatings, potting and encapsulation compounds and impregnation resins.
The product line offers over 3,000 grades of specially designed formulations of acrylics, anaerobics, cyanoacrylates, epoxies, latex, polyamides, polyurethanes and silicone systems to provide an optimal solution for even the most extreme applications.
• Master Bond: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
