Product category:
Adhesives and adhesive bonding equipment
News Release from: Master Bond | Subject: EP50-1 epoxy adhesive
Edited by the Manufacturingtalk Editorial
Team on 18 June 2008
Adhesive cures very quickly at room
temperature
Master Bond has developed an exceptionally fast curing two component epoxy adhesive for general purpose bonding and develops high bond strength exceeding 140kg/cm2 at room temperature.
Master Bond has introduced an 'exceptionally fast' curing two component epoxy adhesive for general purpose bonding Called EP50-1, it readily develops high bond strength of more than 140kg/cm2 (2000 lb/in2) at room temperature
This article was originally published on Manufacturingtalk on 15 Feb 2008 at 8.00am (UK)
Related stories
Epoxy 'Super Glue' offers 3 minute set
A two component epoxy adhesive sets in 3 min for high performance general purpose bonding and cures in a few hours at ambient temperatures to develop a high bonding shear strength.
The bonding strength is relatively insensitive to cleaning procedures.
Master Bond EP50-1 gels within 45s and is fully cured within 5 min at ambient temperatures.
Master Bond told manufacturingtalk that EP50-1 produces durable high strength and tough bonds, which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents.
It is approved for service over the temperature range of -51 deg C to more than +120 deg C.
EP50-1's adhesion to metals, glass, ceramics, wood, vulcanised rubbers and also many plastics is excellent, said Master Bond.
EP50-1 is now available in pre-measured, flexible divider pouches (bubble packs), disposable cartridges (inserted in a simple to use gun applicator for easy and accurate dispensing) and in pint, quart, gallon and 5 gallon containers. Request a free brochure from Master Bond ...
• Master Bond: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
