Product category:
Maintenance planning, services and equipment
News Release from: MSM | Subject: CryonomicO Dry Ice Cleaning Equipment
Edited by the Manufacturingtalk Editorial
Team on 18 June 2002
Making sense of industrial cleaning
processes
Mike Martin describes a dry ice cleaning process which will remove environmental concerns associated with traditional solvent cleaning systems and manual mechanical removal techniques.
Mike Martin describes a dry ice cleaning process which will remove environmental concerns associated with traditional solvent cleaning systems and manual mechanical removal techniques MSM, distributor of the CryonomicO Dry Ice Cleaning Equipment, says that elements such as environmental concerns, economic competitiveness and technology have converged, causing industry and government to re-evaluate manufacturing processes
This article was originally published on Manufacturingtalk on 15 Feb 2002 at 8.00am (UK)
Related stories
Cleaning is cool with dry ice
A fast, environmentally friendly and cost effective method of cleaning virtually any type of material can now be achieved by using a dry ice cleaning system.
3D models of off-the-shelf telescopic slides
Telescopic ball bearing slide designer and manufacturer, Accuride International, has produced optimised 3D models of its 'off-the-shelf' products which can be downloaded via its website.
Many companies have changed from traditional solvent cleaning to alternative methods in a move towards zero discharge.
Companies worldwide are faced with new challenges as more and more emphasis is placed on providing environmentally safer and more cost effective ways of cleaning industrial equipment.
Typical cleaning problems - roblems of cleaning in an industrial environment are continual.
Further reading
Full digital set-up on tension control system
A new digital tension controller is claimed to be one of the most comprehensive tension control systems currently available
Differential drives offer intelligent phase shifts
Using the advantages offered by differentials companies operating in industries such as printing, packaging and labelling can expect to make significant gains.
Temperature transmitter used in hazardous areas
Foundation Fieldbus temperature transmitter for hazardous areas is a head mounted device that can be installed into an existing enclosure providing the opportunity for cost savings.
The need to reduce downtime, the desire to eliminate mould wear or reduce the use of hazardous solvents are all factors that effect day-to-day running.
In addition the potential damage to base surfaces, accumulations of grease and dirt, layers of old paints, and general grime all can have an effect on the operation of equipment and add to business costs.
Traditional cleaning methods - solvents, sand blasting and manual sweeping or bushing have normally been used in industrial cleaning.
Each has specific applications and constraints, and all result in additional environmental and disposal concerns.
Solvents - the most common industrial cleaning method today is the use of solvents to remove oils, grease, dirt and even paint from machinery and equipment.
There are a variety of solvents available that are effective and easy to use, making this method of cleaning an important tool in plant maintenance.
However, there are considerable risks and costs involved with solvent use: Workers must be protected from carcinogens, the cost of disposing of hazardous waste is now rocketing and solvents release severe greenhouse gases and deplete the ozone layer.
In many cases solvent cleaning creates more waste that the original dirt or grease, and the resultant waste is considered hazardous Sand blasting - sand blasting is another common method of removing layers of paint or dirt from exposed areas.
It is useful only where there is sufficient space to mitigate the resultant dust cloud and where the projected sand can reach large open areas of the equipment.
It has many significant disadvantages, including the generation of more solid waste than was originally present on the equipment, breathing hazards for workers and nearby personnel, and potential damage to the underlying surface being cleaned by the abrasive sand particles.
Manual cleaning - the age-old method of manually scraping, brushing and sweeping dirt and grime from surfaces is the simplest but least-efficient method of industrial cleaning.
The soaring cost of labour, the unpopularity of performing such tasks, which often leads to a high turnover of personnel are all problems, associated with manual cleaning.
In addition, the complexity of some equipment and the consequent downtime makes this an unpopular choice.
Whether it is because companies have had problems with one or all these traditional cleaning methods, dry ice blast cleaning has gained widespread acceptance in a variety of industries as the preferred method of cleaning.
Industries that now use dry ice blasting include food industries, rubber producers, plastic and aluminium manufacturers, the automotive industry, glass bottle production, paper and packaging, shipping, robotics, dryers and engine maintenance are just a few of the industries and applications benefiting from this cleaning method.
How it works - this novel technology involves the use of solid carbon dioxide, commonly known as dry ice, which is propelled at high velocity to impact and clean a surface.
Upon striking the surface it lifts away the contaminant whether it is rubber or plastic residue, release agents, dirt, paint or other unwanted material.
The dry ice then sublimates and disappears.
The contaminants drop to the floor and are swept away during routine maintenance.
Because dry ice disappears on contact with the surface, no other contaminant is introduced during the cleaning process.
This allows manufacturers to clean in situ without downtime or disassembly.
Jobs that once took hours or even days may now take only minutes.
In addition as dry ice cannot etch or profile most surfaces, it is no longer necessary to replace moulds or equipment damaged by grit blasting.
The dangers of toxic or polluting residues and wastes are eliminated and there is no more collection, treatment or disposal of hazardous waste in the form of used solvents or large amounts of contaminated sand.
The machinery requires no post-treatment cleaning, as is often the case with both sand blasting and solvent cleaning, and only the actual residue remains for disposal.
As a result of the speed in which dry ice blasting removes contaminants, its users save substantial time.
Its application time is either equal to or faster than both solvent washing and sand blasting, without the extensive post-application clean-up time required by both of the other methods.
Cleaning costs are thus directly reduced, as are costs associated with plant machinery downtime and lost production opportunity.
Those manufacturers that are not yet familiar with CO2 blast cleaning technology like CryonomicO, will be surprised at the dramatic reductions in downtime made by on-line cleaning.
For example in the United States the tyre industry has cited a gain of nearly 9,000 press hours annually by using this method of cleaning.
Today's environmental issues and resultant legislation is only the beginning with the prospect of further legislation imposing even stricter regulations on general industry.
Dry ice blasting provides industry with a means of meeting current and future legislation whilst at the same time saving themselves costs on solvents, labour, downtime and the early renewal of capital equipment.
chemical, sand and wet-blasting systems.
• MSM: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
