Product category:
Abrasive machining - manual and CNC machines
News Release from: Metabo | Subject: GE900 Plus 3in die grinder
Edited by the Manufacturingtalk Editorial
Team on 24 May 2002
Die grinder offers more torque and
variable speed
A new versatile, variable speed 3in die grinder offers a torque three times higher than similar units, making it ideal for grinding internal surfaces in polishing and finishing applications.
A new versatile, variable speed 3in die grinder that offers a torque three times higher (27 inch lb.) than similar units, making it ideal for grinding internal surfaces in polishing and finishing applications, has been introduced by Metabo The new GE900 Plus is geared to run at a lower rpm range than similar grinders, which increases the number and type of usable accessories for sanding, polishing or buffing, such as flap wheels and non-woven abrasive finishing wheels
This article was originally published on Manufacturingtalk on 29 Mar 2002 at 8.00am (UK)
Related stories
Variable speed die grinder has spindle lock
A new variable speed 2in (50mm) die grinder that greatly simplifies the procedure required to change accessories. Having a spindle lock only one wrench is needed on the collet.
Hammer drill offers heavy duty drilling
With a maximum tightening torque of 159inlb, this hammer drill offers 3/4in drilling capacity in concrete, 1/2in capacity in steel, and 1-1/2in capacity in softwood.
The new grinder is designed for ease-of-use, featuring a side handle for increased user control and a spindle lock-one wrench feature that enables users to change accessories using only one wrench instead of two.
The switch is ergonomically located on the top of the tool, making it easy to operate with either the right or left hand.
Metabo's Vario-Constamatic (VC) full-wave electronic speed control allows users to vary speed to accommodate a variety of accessories, making the GE900 Plus useful for grinding and cutting a wide range of materials, from hard to soft, including plastic.
The GE900 Plus has a hardened and ground 1/4in collet for accurate balance of fitted attachments, and auto-stop carbon brushes that increase brush life while preventing motor damage that can be caused by worn brushes.
The grinder has a no-load speed of 2,500 - 6,000 rpm and is rated at 7.5 amps, 900 watts.
A collet wrench, spindle wrench, the 1/4in collet, and the side handle are all offered as standard with the GE900 Plus.
• Metabo: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
