Product category:
Portable power tools
News Release from: Metabo | Subject: UHE22 and UHE28 multi hammers
Edited by the Manufacturingtalk Editorial
Team on 19 September 2002
Versatile, powerful rotary hammers
Metabo's new multi hammers allow users to switch from drilling, percussion drilling, or no-rotation percussion (hammer) operations with a single tool
Metabo Corporation has released a datasheet on the company's new line of versatile, powerful rotary hammers The UHE22 and UHE28 multi hammers allow users to switch from drilling, percussion drilling, or no-rotation percussion (hammer) operations with a single tool
This article was originally published on Manufacturingtalk on 29 Mar 2002 at 8.00am (UK)
Related stories
Variable speed die grinder has spindle lock
A new variable speed 2in (50mm) die grinder that greatly simplifies the procedure required to change accessories. Having a spindle lock only one wrench is needed on the collet.
Hammer drill offers heavy duty drilling
With a maximum tightening torque of 159inlb, this hammer drill offers 3/4in drilling capacity in concrete, 1/2in capacity in steel, and 1-1/2in capacity in softwood.
Outlined in the new datasheet is the tool's wide range of applications, which includes drilling a clean hole in steel or wood, drilling anchor holes in concrete or brick, or chiseling concrete or brick.
The literature also describes how users can easily activate the percussion stop to permit ordinary drilling and the rotation stop to permit chiseling.
The electronic controls discussed in the datasheet range from Variospeed control to winding temperature monitors that signal the warning of an impending overload to Metabo's S-automatic safety clutch and winding protection grid that increases the life of the motor up to 5 times.
Tool specifications in the datasheet include the UHE22's 0-1050/0-2900 rpm no-load speeds; 133 inch lbs of torque; 0 to 2.2 joules per blow; and drilling capacity of 7/8" in concrete using solid bits as well as the UHE28's 0-950/0-2600 rpm no-load speeds; 195 inch lbs of torque; 0 to 2.4 joules per blow, and drilling capacity of 1-1/8" in concrete using solid bits.
The datasheet also lists the multi hammers' standard features such as a quick-change chuck that allows bit changes without the use of tools, a carrying case, a side handle, an SDS-Plus bit holder, and a depth gauge.
• Metabo: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
