Product category:
Non-contact, Optical and Laser measurement systems
News Release from: Micro-Epsilon UK | Subject: ReflectCONTROL 'deflectometry' system
Edited by the Manufacturingtalk Editorial
Team on 29 November 2007
Automatic systems scan car bodies for
defects
Surface defect detection systems operate as stationery or robotic arm test rigs to scan multiple inspection points on car body parts, automatically identifying and marking any surface defects.
The quality control of shiny or reflecting surfaces in the automotive industry still takes place largely using manual techniques Typically, quality control personnel will observe reflected images using fluorescent lamps on the surface to detect defects
This article was originally published on Manufacturingtalk on 23 May 2008 at 8.00am (UK)
Related stories
Laser sensors have large stand-off distances
High performance laser sensors, with large stand-off distances, are work in applications where it is not possible to mount the sensor close to the measurement target.
Laser profile sensor software exports to any CAD
3D visualisation software for laser profile sensors enables users to export captured 3D data to other software and the data can be exported as a 3D point cloud to any CAD/CAM software application.
This method is expensive and time consuming and provides results that are often difficult to reproduce and are not quantifiable.
In order to detect dents, bulges and other surface defects on a reflecting object - for example, on the bonnet of a car - normally the reflected image of the surroundings on the surface are observed.
The difference between the surroundings and the reflected image is a measure of the quality of the surface.
Further reading
Cool infrared thermometers operate in 250 deg C
Infrared thermometers operate in 250 deg C do not need any cooling when checking materials on production lines and in process environments.
Laser position/measurement sensor guide published
A 25-page guide offers technical data and application examples for optoNCDT laser optical displacement and position measurement sensors.
Draw-wire sensors offer robust, reliable sensing
Micro-Epsilon has introduced the wireSENSOR range of digital and analogue draw-wire displacement sensors for machine builders and OEMs who require low cost, robust, reliable sensing solutions.
To apply this process, which occurs naturally in the human brain and eye, to an automatic quality control system, demands considerable expertise in sensor systems and image processing, said Micro-Epsilon.
BMW is working closely with sensor system specialist Micro-Epsilon to develop and test complete surface defect detection systems.
These systems can operate as stationery test rigs or use robot arms.
They scan multiple inspection points on car body parts, automatically identifying and marking any surface defects.
System such as these will enable complete car bodies to be inspected in typically less than 90s, said Micro-Epsilon to manufacturingtalk.com.
The company said that introducing such systems at various stopping points in the assembly line will therefore avoid production delays.
Sales Engineer at Micro-Epsilon's Systems Division, Franz Hochwimmer, said: "Since 2005, we've been working closely with BMW, initially developing systems to detect surface defects on small, plastic and rubber components on the car.
This involved the inspection of components such as car bumpers, mudguards and cylinder heads - but not the complete body of the car.
At the end of 2005, Micro-Epsilon supplied a system for BMW's Dingolfing plant, to automatically detect surface defects on the sides of the car, including front and rear mudguard areas and the doors".
Micro-Epsilon's reflectCONTROL 'deflectometry' system has been developed to such an extent that it can now be used in industrial production.
In order to ensure reproducible, well-structured surroundings - the reflected image of which is to be recorded and evaluated - a striped pattern is shown on a display.
Cameras record the reflected image of the display and pass the data to an industrial PC for evaluation.
The complete system set-up is mounted on a robot arm.
It is then possible to move the system around the object to be inspected, for example, a car body.
Alternatively, a stationary installation is also possible, in which the parts are placed on a measuring table.
Hochwimmer added: "More recently, in 2006, we installed reflectCONTROL on a robot arm, which inspected around 36% of the car body for defects.
BMW Dingolfing has evaluating these results now with a view to installing a complete, four-robot arm detection system shortly, which will inspect complete car bodies across two vehicle assembly lines".
* High-resolution CCD cameras - in Micro-Epsilon's reflectCONTROL system, an LCD with a screen diagonal of up to 40in is used as the display.
The cameras used are high-resolution CCD cameras.
It is therefore possible to measure an area of 60cm x 80cm in one recording.
If a larger area has to be measured, the measurement system can simply be positioned at various places along the surface by the robot.
Here, the control of the robot is integrated into the system.
With this set-up, even very small defects down to 0.5mm can be detected reliably, said Micro-Epsilon.
In quality assurance, a decision has to be made whether a part is acceptable or defective.
In a manual procedure, the worker must reliably recognise different faults in order to be able to make this decision.
With a sprayed surface, for example, these may be large dents, inclusions in the spray coating, porosity, grinding and polishing marks, and so on.
With deflectometry, the reflected image recorded by the camera is processed in a computer.
During the analysis of the image data, the various faults must be reliably detected and unambiguous decisions made.
Whereas a dent causes a slight change in the surface curvature over a comparatively large region, the change of curvature for an inclusion in the spray coating is very large, but is restricted to a very small area.
To enable the system to accurately and reliably measure to such a high resolution, the system constantly compares the inspected data with the exact 3D CAD model.
Otherwise, for example, openings in the body parts may be erroneously detected as faults.
* Complete car bodies inspected in less than 90s - at BMW's Dingolfing plant in Germany, in-line stations are planned, which will evaluate the complete car body.
To do this, four robots in a measurement station, will acquire approximately 65 to 80 inspection points on the body.
The inspection of the complete body will last for between 60s and 80s.
If the test rig is positioned at a stopping point in the production line, the process can take place in-line and without introducing delays.
* Many advantages - there are many advantages with this fully automated quality control system, said Micro-Epsilon to manufacturingtalk.
The primary factor here is, of course, the dependability and absolutely reproducible decisions as to whether a part is acceptable or defective.
For further inspection and possible processing, two marking robots, which mark the defective places, follow the inspection unit.
Also, the defects that occur are saved and documented, so that they are available for more thorough analysis later.
Consequently, it is possible to generate statistics documenting which types of defect occur and how often.
Statistics of this nature can then be used for optimising the processes, leading to improved quality, less scrap and rework costs.
The reflectCONTROL measurement system is also suitable for other applications.
The method can be employed anywhere where shiny or reflecting surfaces need to be checked for defects.
Examples can be found in the manufacture of clear-coated display covers, glass surfaces or mirrors. Request a free brochure from Micro-Epsilon UK ...
• Micro-Epsilon UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
