Product category:
Arc welding equipment, manual and automatic
News Release from: Murex Welding Products | Subject: Transweld Challenger 301T welding unit
Edited by the Manufacturingtalk Editorial
Team on 05 March 2003
Rugged unit offers wide MIG and FCW
power range
Featuring a simple to use switched type design and a rugged all metal construction, an industrial welding package can be used for MIG from as low as 40A to FCW at 300A.
A new single phase 240V powered industrial welding equipment package, the Transweld Challenger 301T, has been introduced by Murex Welding Products It is a rugged, reliable and simple package designed MIG, MAG and flux cored wire welding
This article was originally published on Manufacturingtalk on 12 Sep 2008 at 8.00am (UK)
Related stories
When, where and why to use MIG welding
Mick Andrews, superintendent of the Murex Welding Process Centre, explains MIG welding and the advantages offered by this versatile process.
When, where and why to use TIG welding
Mick Andrews, superintendent of the Murex Welding Process Centre, explains TIG welding and the advantages this process offers for specialist applications.
It welds from 40 to 300A and provides 270A at 30% duty and 200A at 60%.
It operates from a single phase 240V 30A supply.
The Transweld Challenger 301T can be used for a wide range of industrial welding applications, and is suitable for applications up to 300A using 1.0 or 1.2mm diameter wires.
For thin sheet, it can weld up to 1mm thick metal using 0.8mm wires at as low as 40A.
The power source uses a simple to use switched type design and is a rugged all metal construction.
Heavy duty undergear/bottle carrier make this unit ideal for moving around the workplace for production welding applications.
Combined with the Challenger 301T power source is the new Transmatic Lynx 2D wire feed unit.
It provides reliable and powerful wire feed up to 20m/min using its two large diameter feed rolls and permanent magnet high torque motor.
Its sealed electronic compartment houses the proven Murex motor control system as well as digital volt and amp metering circuitry.
As many as 14 voltage settings are available with Transweld Challenger 301T to give very fine welding control.
A range of options are available including a trolley kit for the Lynx 2D feeder and a choice of Murex MXA MIG torches. Request a free brochure from Murex Welding Products ...
• Murex Welding Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
