Product category:
Manual oxy-fuel gas cutting, welding, brazing soldering and cutting
News Release from: Murex Welding Products | Subject: Multi-stage regulators,
Edited by the Manufacturingtalk Editorial
Team on 29 August 2005
Multi-stage regulators resist leaks
In multi-stage regulators, the first diaphragm of each model is coated stainless steel to provide high integrity leak tightness - necessary when using 'light' gases such as helium.
The Murex range of Saffire Multi-Stage Regulators will provide precise control of gases and all models are 300 bar compatible All regulator components are purpose designed for non-corrosive high pressure gas service
This article was originally published on Manufacturingtalk on 3 Oct 2003 at 8.00am (UK)
Related stories
Steels up to 6mm welded from 240V supply
Capable of welding 0.8mm to 6mm mild steels, as well as stainless or aluminium, a compact arc welder operates off 240V supply and has a welding range of 30 to 185A.
In a new development, the first diaphragm of each model is coated stainless steel to provide high integrity leak tightness.
This feature is necessary when using 'light' gases such as helium.
Saffire 300 Series2+ multi-stage regulators are the 'flagships' of the range.
These multi-stage models are fully 300 bar capable whilst retaining the sensitivity and accuracy necessary for precise control.
Designed to comply with BS EN ISO 2503, they are manufactured under the BS EN IS0 9000 quality management system.
For applications using gases such as helium, hydrogen and CO2, there is a range of regulators available with outlet pressures of either 4 or 10 bar and differing maximum flows. Request a free brochure from Murex Welding Products ...
• Murex Welding Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
