Product category:
Arc welding equipment, manual and automatic
News Release from: Murex Welding Products | Subject: Three phase arc welding machine
Edited by the Manufacturingtalk Editorial
Team on 23 May 2006
MIG welder's torch changed without tools
A professional three phase arc welding machine has a MIG welding torch, which can be removed and reconnected without tools, using an industry standard 'Euro' Central Adaptor.
For bodyshops and fabricators, the Murex Tradesmig 280-3 is a professional three phase machine supplied with a MIG welding torch which can be removed and reconnected without tools, using an industry standard 'Euro' Central Adaptor The contact tip, gas nozzle, liner, or even the complete torch, can be removed and replaced in seconds
This article was originally published on Manufacturingtalk on 3 Oct 2003 at 8.00am (UK)
Related stories
Steels up to 6mm welded from 240V supply
Capable of welding 0.8mm to 6mm mild steels, as well as stainless or aluminium, a compact arc welder operates off 240V supply and has a welding range of 30 to 185A.
Full details are available in new free literature published by the company.
The Tradesmig 280-3 uses an industry proven precision wire feeder system, with large feed rolls and calibrated pressure adjustment.
It can utilise the heaviest (70kg) K size gas cylinders and can be readily moved around the workshop.
It has a rugged sheetmetal enclosure with a sloping control panel for easy and convenient operator use.
A fully enclosed wire feed compartment keeps dust, dirt and other contaminants away from the wire supply.
To protect the machine from damage or overload the Tradesmig 280-3 incorporates thermal trips with an orange warning light. Request a free brochure from Murex Welding Products ...
• Murex Welding Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
