Product category:
Manual oxy-fuel gas cutting, welding, brazing soldering and cutting
News Release from: Murex Welding Products | Subject: Manual oxy-fuel gas cutters
Edited by the Manufacturingtalk Editorial
Team on 03 April 2007
Oxy-fuel gas cutters resist 'backfires'
Manual oxy-fuel gas cutters incorporate a nozzle mix principle designed for maximum safety as well as a backfire resistant design and provides 'splash-free' starts.
Murex Welding Products' latest Saffire NM Cutter range incorporates all the latest technological features necessary to meet the demands of the hand cutting market Each cutter incorporates a nozzle mix principle designed for maximum safety as well as a backfire resistant design
This article was originally published on Manufacturingtalk on 12 Sep 2008 at 8.00am (UK)
Related stories
When, where and why to use MIG welding
Mick Andrews, superintendent of the Murex Welding Process Centre, explains MIG welding and the advantages offered by this versatile process.
When, where and why to use TIG welding
Mick Andrews, superintendent of the Murex Welding Process Centre, explains TIG welding and the advantages this process offers for specialist applications.
A unique cutting oxygen flow valve acts indirectly to bring in the oxygen stream.
This important feature gives a true 'bleed' characteristic to create splash free starts and progressive piercing and the smoothest possible cutting conditions.
Two NM Cutters are available to provide cutting capacities of 250mm and 400mm with 90 deg and 75 deg cutting heads.
The NM 250 model, for both acetylene and propane service, is primarily designed for general workshop cutting.
Its balance and trim make it ideally suited to most industrial applications.
It features a new control knob for positive flame setting and a robust lever latch.
The NM 400 benefits from a 75 deg head combined with a cutting capacity of 400mm.
The cutter is designed for heavy duty fabrication and scrap cutting applications.
Here, the combination of head angle and extended length create both positive and comfortable working conditions for the operator.
The range of Saffire NM cutters continues the tradition of nozzle mix design with the safety, quality and reliability synonymous with the Saffire brand.
A proven design incorporating the latest technical features necessary to meet the changing service requirements of the hand cutting market.
Saffire NM cutters are designed to EN5172 'Handheld Blowpipes for Welding and Cutting' and manufactured in the UK under the quality management systems of BS EN ISO 9002. Request a free brochure from Murex Welding Products ...
• Murex Welding Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
