Product category:
Manual oxy-fuel gas cutting, welding, brazing soldering and cutting
News Release from: Murex Welding Products | Subject: Vantage cutter, the NM18/90
Edited by the Manufacturingtalk Editorial
Team on 03 August 2007
Oxy-fuel gas torch cuts 250mm plate
For general workshop cutting, an oxy-fuel gas torch is ideally suited to heating, gouging and rivet washing operations and can cut up to 250mm plate.
Murex has introduced the Vantage cutter, the NM18/90, with an 90 deg cutting head and 18in long It is designed for using acetylene and propane, requiring only a simple nozzle change
This article was originally published on Manufacturingtalk on 3 Oct 2003 at 8.00am (UK)
Related stories
Steels up to 6mm welded from 240V supply
Capable of welding 0.8mm to 6mm mild steels, as well as stainless or aluminium, a compact arc welder operates off 240V supply and has a welding range of 30 to 185A.
A robust and reliable heavy engineering tool for general workshop cutting, it iperforms heating, gouging and rivet washing operations and can cut up to 250mm plate.
The new NM cutter continues the tradition of nozzle mix design with the safety, quality and reliability synonymous with the Murex brand.
The proven design incorporates the latest technical features necessary to meet the changing service requirements of the manual cutting market.
The NM incorporates a nozzle mix principle designed for maximum safety as well as a backfire resistant design.
A novel cutting oxygen flow valve acts indirectly to bring in the oxygen stream.
This important feature gives a true 'bleed' characteristic to create splash free starts and progressive piercing and the smoothest possible cutting conditions. Request a free brochure from Murex Welding Products ...
• Murex Welding Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
