Product category:
Welding ancilliaries
News Release from: Murex Welding Products | Subject: Saffire 300 Series regulator for MIG
Edited by the Manufacturingtalk Editorial
Team on 18 March 2008
MIG welding gas regulator offers
stability
A gas regulator for MIG welding has essential safety and control features that ensure a stable flow of shielding gases from the gas cylinder during the entire working life of the regulator.
Murex said that its Saffire 300 Series regulator for MIG welding is a true 'fit and forget' solution that gives stable control of gas flow rates It includes a number of essential safety and control features that ensure a stable flow of shielding gases from the gas cylinder throughout the entire working life of the regulator
This article was originally published on Manufacturingtalk on 3 Oct 2003 at 8.00am (UK)
Related stories
Steels up to 6mm welded from 240V supply
Capable of welding 0.8mm to 6mm mild steels, as well as stainless or aluminium, a compact arc welder operates off 240V supply and has a welding range of 30 to 185A.
Reliable MIG welder facilitates thin-wall joints
Providing high quality joints in thin sheet metals down to 0.5mm place growing demands on MIG welding equipment and operators, which is why reliable TIG weld process control is essential.
The Saffire Series 2+ ARC 40L regulator will save on shielding gas costs by ensuring a highly accurate flow rate, said MUrex to manufacturingtalk.
For control and accuracy it features a two stage diaphragm.
1 - One is stainless steel and gives full control of cylinder pressure.
2 - The second, a flexible neoprene diaphragm, provide additional control and accuracy.
It therefore achieves highly economic flow rates without the user of an economiser and also prevents gas surges.
An adjusting knob in use shows service pressure and type of gas in use.
Saffire products are renowned for their intrinsic safety and this regulator has a number of essential features.
These include build features such as a conical high strength bonnet to contain safety increased cylinder pressures; an inlet filter to prevent foreign matter entering the regulator, reduce the velocity on incoming gas and protect the regulator's mechanism and the regulator's BC6A CP 7 mark clearly shows when the regulator should be replaced or refurbished by Murex Welding Products.
Those companies looking for a high quality, extremely safe regulator for MIG welding that gives problem free exceptional performance in cold weather should specify the Saffire Series 300 Series 2+ ARC 40L regulator. Request a free brochure from Murex Welding Products ...
• Murex Welding Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
