Product category:
CNC laser cutting and profiling machines
News Release from: Manufacturing Service Solutions | Subject: Nitrogen generator - laser cutting systems
Edited by the Manufacturingtalk Editorial
Team on 26 May 2006
Nitrogen generator cuts laser
consumption costs
Subcontractor purchased a nitrogen generator to replace an expensive manifold cylinder pack supply and has had no customer complaints due to edge quality, no breakdowns, or 'gas-outs'.
Martin Cook of Cutting technologies said: "We purchased a nitrogen generator from MSS in November 2005" "We were previously running on MCP's (manifold cylinder packs), the most expensive option of nitrogen supply, but were struggling to get our Landlord's approval for external bulk storage
This article was originally published on Manufacturingtalk on 30 Nov 2006 at 8.00am (UK)
Related stories
Nitrogen generator reduces laser cutting cost
A nitrogen generator can produce nitrogen for around GBP 0.05/m3, making it cost effective to widen the range of parts laser cut using it as an assist gas.
MSS to market N2 generation plant in UK
With the aim of offering dramatic reductions in the cost of purchased gas, MSS will distribute domnick hunter nitrogen generation equipment for laser cutting in the UK.
As an example of the high cost, we had to charge GBP 80.00 per hour just for nitrogen when cutting 12mm stainless." He explained: "We only run two lasers, but we run them long and hard and a high percentage of our work is decorative stainless, aluminium and brass, up to 15mm thick in stainless steel, 10mm in aluminium and 6mm in brass.
We are currently running the generator at 90ppm oxygen impurity and achieving a flow-rate in excess of 70m3 per hour." Prior to purchase the company carried out numerous trials at different ppm oxygen levels and showed the results to the most critical clients.
The company reports that it had had no negative feedback at levels below 150ppm, so proceeded with the installation.
Cook said: "We chose a generator that would cope with 80% of our work and expected to have to supplement its output occasionally with MCPs.
We have run solely on the generator since November 2005 and have had no customer complaints due to edge quality, no breakdowns, no 'gas-outs' and never had to supplement the generator output with bottled nitrogen." He added: "In other words, the generator has done exactly what it 'says on the tin.
The most it has coped with across the two machines has been 10mm stainless on one and 5mm aluminium on the second machine, again with no issues and the generator was filling the tank quicker than we were emptying it." The company has negotiated a five year maintenance contract, which is next to nothing per month, efficiency has improved dramatically through not having to constantly change MCPs, the factory is a much safer place because as it is not constantly moving the MCPs around and, said Cook: "We dare not print how much we are saving per month on the nitrogen.
We are really pleased the landlord stopped us installing external bulk storage, he's saved us a fortune." Nitrogen represents a significant percentage of a laser company's costs and anything a factory can do to reduce this is beneficial to its profitability and its competitiveness against other processes.
• Manufacturing Service Solutions: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
