Mahr Federal
1144 Eddy Street
Providence
RI 02905
USA
Latest articles from this company
News releases from this company
Amplifiers provide benefits of analogue display
The Series 830 analogue gauging amplifiers from Mahr Federal feature dual input ports for single or differential ID or OD measurements with selectable ranges in inch or metric units.
News from Manufacturingtalk, 11 June 2009
Mahr Federal releases Series 300P snap gauges
Mahr Federal's Series 300P indicating snap gauges enable accurate and reliable measurement results on cylindrical parts with narrow tolerance ranges.
News from Manufacturingtalk, 11 May 2009
Mahr Federal introduces MMQ 200 Formtester
Mahr Federal has extended the capability of its MMQ Formtester line with the MMQ 200 Formtester, optimised for measuring cylindricity and other deviations of form and position.
News from Manufacturingtalk, 16 April 2009
Mahr to showcase Linear 100 and 36 B at expo
Mahr Federal is to feature its Linear 100 and the 36 B ID/OD indicator gauge at the Westec 2009 Exposition at the Los Angeles Convention Center, CA between 30 March and 2 April 2009.
News from Manufacturingtalk, 7 January 2009
Linear 100 measures lengths and diameters
Mahr Federal has introduced a universal length measuring instrument for high accuracy internal and external measurements directly on the shop floor.
News from Manufacturingtalk, 15 December 2008
Mahr to show optical surface metrology system
Mahr Federal will feature its Marsurf WS 1 optical surface metrology system at MDandM West, at the Anaheim Convention Center in Anaheim, California, from 10 to 12 February 2009.
News from Manufacturingtalk, 19 November 2008
Universal gear tester has high accuracy probe
Mahr Federal has released a Class 1 Universal Gear Tester for fast, accurate analysis of a wide range of gear and gear tool applications on gears with ODs up to 400mm.
News from Manufacturingtalk, 21 July 2008
Surface finish gauge measures multiple parts
Mahr Federal's surface finish guage will index and measure multiple small parts, such as gears, fuel injector components, or inner and outer bearing components.
News from Manufacturingtalk, 23 May 2008
Mahr releases optical surface measurement system
Mahr Federal said that its MarSurf WS 1 surface measurement device uses white-light interferometry to provide fast, high precision, non-contact measurement of surface texture.
News from Manufacturingtalk, 28 April 2008
Height gauge has three ways of measuring
Height gauge offers three measurement techniques: a normal keypad initiation; a Quick Mode feature and two Speed Keys to move the measuring carriage to the desired position.
News from Manufacturingtalk, 11 January 2008
USB ready gauge features high accuracy
For those who need the basics in a digital indicator, a digital indicator allows multiple indicators to be inexpensively linked to PCs through a USB hub.
News from Manufacturingtalk, 11 December 2007
Metrology catalogue includes specifications
Catalogue covers the full range of Mahr Federal's dimensional metrology instruments, including the latest digital calipers, depth gauges, height gauges and digital indicators.
News from Manufacturingtalk, 29 November 2007
Digital indicator colour show in-/out of tolerance
A digital indicator features 'at-a-glance' workpiece tolerance monitoring with a large LCD display that appears green or red to reflect in- or out-of-tolerance conditions.
News from Manufacturingtalk, 9 November 2007
Height gauge starts measuring in three ways
Height gauge three distinct ways to initiate measurement as in addition to normal keypad initiation, allows the measurement cycle to be initiated by simply pushing the carriage to the work piece.
News from Manufacturingtalk, 5 November 2007
Most popular precision gauges
Mahr Federal has produced a catalogue detailing over 50 of its most popular precision gauges called "Precision gauges, Best Sellers Guide".
News from Manufacturingtalk, 16 April 2007
Pocket portable surface finish gauge
As part of its array of dimensional gaging products and metrology systems, Mahr Federal will feature its new Pocket Surf PS1 portable surface finish gauge at the Westec 2007 Exposition.
News from Manufacturingtalk, 22 January 2007
Portable surface finish gauges for 24 parameters
Mahr Federal has introduced a new generation of its highly popular Pocket Surf portable surface finish gauges.
News from Manufacturingtalk, 4 January 2007
Form tester goes back to basics
Mahr has taken its many years of experience in form measurement systems back to the drawing board and has emerged with an entirely new, fully automated system for the measurement of form and position.
News from Manufacturingtalk, 14 November 2006
Precision control of complex turned parts
The Helio-Scope from Mahr is a universal optical measuring system designed to facilitate precision control of complex turned parts.
News from Manufacturingtalk, 30 October 2006
Metrology amplifiers have background-lit display
Metrology amplifiers with background-lit LCD display have five three-color status lamps that indicate warning and tolerance limits, and two features can be displayed simultaneously.
News from Manufacturingtalk, 20 September 2006
Not what you're looking for? Search the site.
Featured articles
-
Micro-Epsilon introduces Scancontrol 2710 sensor
The latest addition to Micro-Epsilon's Scancontrol range of 2D/3D laser profile sensors is the Scancontrol 2710, which is compact and offers new setup and configuration software.
-
IFM unveils OBF500 range of fibre-optic amplifiers
Long sensing ranges and fast switching characterise the OBF500 series of fibre-optic amplifiers from IFM Electronic.
Categories
- Machine Tools: Cutting (4,191)
- Machine Tools: Metalforming, shearing, folding and punching (1,647)
- Machine Tools: moulding (1,177)
- Cutting tools (1,971)
- Welding and Joining (1,590)
- Finishing, preparation, coating and painting (1,145)
- Automation, assembly systems and computer systems (1,293)
- Manufacturing support (9,130)
- Industry news, commerce, exhibitions, education (8,502)
- Packaging (2,889)
- Specialist Manufacturing Sectors and Metals Producing (1,403)
- Books, CDs and Videos (213)
- IT for manufacturing management and production (4,072)
- IT for engineering, industrial and commercial applications (2,726)
- Used machinery and machine tools (37)
- Materials handling and storage (1,041)
- Wood and non-metallics working (79)
- Metrology instruments and systems (3,890)
- Testing and quality control systems and services (5,252)
- Subcontracting services (1,262)
