Product category:
Robots and robotic systems
News Release from: MOTOMAN Robotics Europe | Subject: SP100X, 160 kg payload, 4-axis robot
Edited by the Manufacturingtalk Editorial
Team on 15 May 2006
Robotic system automates product
stacking
A GBP 270,000 automated robotic system has replaced the arduous job of stacking cardboard cases of food products by hand at the factory of Red Mill Snack Foods in the West Midlands.
An automated system based on a Motoman SP100X, 160 kg payload, 4-axis robot has replaced the arduous job of stacking cardboard cases of food products by hand at the Wednesbury, UK, factory of Red Mill Snack Foods in the West Midlands Costing GBP 270,000 including conveyors and handling equipment supplied by Soco System (UK), it has eliminated the need to employ up to three operators per shift, 24h/day from Monday to Friday
This article was originally published on Manufacturingtalk on 8 May 2006 at 8.00am (UK)
Related stories
Humanlike robots with one and two arms
Motoman, the robotic division of Yaskawa Electric, has recently developed humanlike robots with one and two arms based on a completely new technological concept.
6-axis robotic welding system reduces cycle times
A six-axis robot working with a servo controlled twin station positioner is now MIG welding aluminium window frames - using cold metal transfer - for off-road vehicles at reduced cycle times.
According to Red Mills' manufacturing director, Simon Faithfull, payback has been calculated at less than two and a half years.
Five bagging machines and production lines are served by the new system, which went live in August 2005.
On the day that the company was visited, three individual lines were processing salt and vinegar Twirls, one was devoted to Tortilla Chips and the other was idle.
Further reading
Six-axis industrial robots perform arc welding
Two 6-axis industrial robots for arc welding are claimed to be 40% faster than previous robots owing to advanced motion control and by minimising arc on/off time.
A hat-trick of benefits in data recording
Metallic pigment and coatings manufacturer Wolstenholme International Ltd has scored a hat-trick of benefits with the installation of an ABB InformIT SM3000 multipoint recorder.
State of the art car dealer uses Abac compressors
The latest low noise ABAC compressors are being used to provide a high quality supply of compressed air for powering various air tools and workshop equipment at a new Hamer Toyota dealership
Bagged product from the production machines is packed manually, 24 packets per case for Twirls, following which the case is top- and bottom-taped automatically before it continues its journey.
Actuated in response to instructions from a host computer, a series of sensors detects the presence and identity of each case, allowing timed pusher cylinders to reorientate them as necessary and count them onto a layer-forming table.
Each product variety has its unique layer pattern programmed into the computer; for Twirls it comprises 13 cases - two rows of five and three rotated through 90 degrees placed at the end.
Once a layer is formed, the robot picks it up in a specially designed gripper and transfers it to one of five available palletising positions (either Chep or Euro pallets) that are situated on pallet roller conveyor sections located next to a shrink-wrapping station.
The robot control knows the appropriate number of layers to complete a pallet, eight in the case of Twirls, although the number of layers can be from four to nine according to case size, which varies from 296 x 239 x 115mm to 594 x 394 x 253mm to suit different products.
When a full pallet is ready, a twin-station pallet transfer car moves adjacent to it, powered rollers on both the conveyor and transfer car effect pallet transfer, and an empty pallet is put in its place on the conveyor.
The full pallet is transferred onto a turntable and stretch wrap is automatically wound around the cases to full height to secure the load.
Finally, the pallet continues out of the cell perimeter guarding via a safety light curtain to the end of the dispatch conveyor, from where it is handled by fork lift truck either to an internal warehouse or onto a waiting trailer for distribution to supermarkets, wholesalers, cash and carry outlets and CTM operators.
The height of a fully loaded pallet is typically 2.2m and the weight of each full case is up to 3kg for bagged product, 5kg for bulk product.
Health and safety concerns relating to manual loading are no longer an issue now that the Motoman robot stacks the pallets, and personnel have been deployed from this tiring and repetitive job to more amenable work within the factory.
When investigating the automation project at the outset and justifying capital expenditure, Red Mill considered the option of individual automated palletising robots to serve each of the five bagging machines.
However, periodic idle times precluded this solution, which in any case was more expensive overall.
Additionally, as the Motoman robot picks complete layers of collated product rather than individual cases, the resulting high speed, flexibility and versatility allows the robot to cope easily with the high throughput at Red Mill.
A visit by Faithfull and his team to Calypso Soft Drinks, Wrexham, UK, where three turnkey robotic packing and palletising cells from Motoman place drinks into boxes and palletise 56 different product and pack size combinations onto shipping pallets in three different stacking patterns, indicated that the supplier's solution would work well at the Wednesbury factory.
• MOTOMAN Robotics Europe: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
