Mykal Industries
Morris Close
Park Farm Industrial Estate
Wellingborough
NN8 6XF
UK
(UK) +44 1933 402822
Latest articles from this company
News releases from this company
Desolvit degreaser used in oil spill clean-up task
Mykal Industries has reported that its Desolvit degreaser (DSI 1000) has been applied in an emergency oil spill clean-up operation at a shipyard in Istanbul, Turkey.
News from Manufacturingtalk, 9 June 2009
Further information available
Epoxy resin cleaner replaces methylene chloride
Mykal Industries recommended epoxy resin cleaner (EO 394) when asked by a manufacturer for an alternative to methylene chloride in the flushing cycle of its mixing and dispensing machine.
News from Manufacturingtalk, 20 January 2009
Further information available
Epoxy resin cleaning made simple and safe
Mykal presents its Special Blend epoxy resin cleaner, SB 394, a specific cleaner for uncured epoxy resins removed manually at ambient temperatures or in heated tanks at temperatures up to 50C.
News from Manufacturingtalk, 17 November 2008
Further information available
Mykal makes degreasing choices simple
Mykal Industries has re-launched its guide to industrial degreasing, the Safe Solutions for Industrial Degreasing catalogue.
News from Manufacturingtalk, 1 September 2008
Further information available
Solvent cleans off high temperature waxes
Mykal Industries has introduced a non-VOC solvent that removes high temperature waxes and other difficult to remove soils in ultrasonic or heated dip tanks at elevated temperatures.
News from Manufacturingtalk, 3 June 2008
Further information available
Wipes remove contamination from electrics
Electrical Power Wipes from Mykal have now been tested and approved for use in the cleaning of cables and cable jointings, as well as oil-filled switchgear
News from Manufacturingtalk, 23 April 2008
Further information available
Polyurethane cleaner has lower VOC emissions
Trials proved that a polyurethane cleaner was a viable alternative to methylene chloride for flushing mixing heads and offered several advantages including significantly lower VOC emissions.
News from Manufacturingtalk, 15 February 2008
Further information available
Ultrasonics clean glass components safely
Glass components manufacturer now uses an ultrasonic tank containing a safer cleaning fluid, followed by a water rinse to clean glass prisms of plaster and paint.
News from Manufacturingtalk, 20 November 2007
Further information available
Citrus solvent cleans up tools and equipment
A citrus based, non-flammable solvent removes oils and greases from components, tools and equipment in manufacturing, engineering, maintenance and assembly operations.
News from Manufacturingtalk, 19 July 2007
Further information available
Degrease and wash fluids approved by aerospace
Among a range of degreasing fluids shown by Mykal at the 2007 Paris Air Show were a high performance aqueos degreaser and a spray wash cleaner - approved by aerospace and defence.
News from Manufacturingtalk, 19 July 2007
Further information available
Oil spills cleaned with performance degreaser
Oil spilled at the Faro Islands is being removed with the help of De.Solv.It High Performance Degreaser from Mykal.
News from Manufacturingtalk, 19 July 2007
Further information available
Degreasing for Solvent Emissions Directive
Mykal Industries has introduced the De.Solv.It range of citrus solvents for industrial degreasing which comply with the Solvent Emissions Directive.
News from Manufacturingtalk, 4 May 2007
Further information available
Solvent degreaser has 100% compliance
High powered degreaser is formulated to remove oils, greases, cutting oils and lubricating fluids from components, tools and equipment and is is not classified as a VOC.
News from Manufacturingtalk, 13 March 2007
Further information available
Low VOC Prepwipes and Prep Cleaner liquid
From January 1st 2007 all products used within the Automotive Refinshing Market must be labelled with the details of their Volatile Organic Compound (VOC) Content.
News from Manufacturingtalk, 30 October 2006
Further information available
Fast dry cleaner removes solvents from panels
A dry cleaner is removing highly flammable solvents from pressed steel panels whilst drying within a time frame, with no paint adhesion problems, while reducing solvent use by 60%.
News from Manufacturingtalk, 12 September 2006
Further information available
Biodegradable solvent replaces white spirits
Lift and escalator manufacturer has successfully used a non-flammable biodegradable safe solvent in degreasing the guide rails, whilst eliminating the unhealthy side effects.
News from Manufacturingtalk, 17 July 2006
Further information available
Power wipes remove grease from electricals
Combining a high absorbent, low lint specialist wipe with a citrus solvent has produced a high performance, high quality impregnated wipe for use in the cleaning of electrical components.
News from Manufacturingtalk, 13 April 2006
Further information available
Water rinseable solvent degreaser ousts kerosene
A cost-effective, non-flammable, fully water rinseable solvent degreaser for use in workshop and maintenance degreasing operations edliminates cleaning using kerosene.
News from Manufacturingtalk, 9 March 2006
Further information available
High performance wipes reduce VOC emissions
High performance wipes (cleaning cloths) have enabled users to significantly reduce VOC emissions and solvent use within their manufacturing processes without adversely affecting production.
News from Manufacturingtalk, 9 January 2006
Further information available
Ultrasonic cleaner replaces trichloroethylene
To reduce use of trichloroethylene, an aerospace company is now using an ultrasonic system with an alkaline solution to clean instrument panels before dismantling.
News from Manufacturingtalk, 4 November 2005
Further information available
Not what you're looking for? Search the site.
Featured articles
-
Micro-Epsilon introduces Scancontrol 2710 sensor
The latest addition to Micro-Epsilon's Scancontrol range of 2D/3D laser profile sensors is the Scancontrol 2710, which is compact and offers new setup and configuration software.
-
IFM unveils OBF500 range of fibre-optic amplifiers
Long sensing ranges and fast switching characterise the OBF500 series of fibre-optic amplifiers from IFM Electronic.
Categories
- Machine Tools: Cutting (4,191)
- Machine Tools: Metalforming, shearing, folding and punching (1,647)
- Machine Tools: moulding (1,177)
- Cutting tools (1,971)
- Welding and Joining (1,590)
- Finishing, preparation, coating and painting (1,145)
- Automation, assembly systems and computer systems (1,293)
- Manufacturing support (9,130)
- Industry news, commerce, exhibitions, education (8,502)
- Packaging (2,889)
- Specialist Manufacturing Sectors and Metals Producing (1,403)
- Books, CDs and Videos (213)
- IT for manufacturing management and production (4,072)
- IT for engineering, industrial and commercial applications (2,726)
- Used machinery and machine tools (37)
- Materials handling and storage (1,041)
- Wood and non-metallics working (79)
- Metrology instruments and systems (3,890)
- Testing and quality control systems and services (5,252)
- Subcontracting services (1,262)
