Films protect variety of coated metal surfaces

Three of films are designed to protect metal surfaces and include protecting pre-coated sandwich panels on foaming lines, pre-coated metals and lacquered surfaces.

Novacel will be at METALCON International, the 17th annual conference and exhibition for the metal construction industry, from October 3-5 in Las Vegas, USA.

At booth 1408, the company will exhibit three of its films exclusively made for protecting pre-coated metal surfaces used in the construction industry: Novacel 9042, 4154, and 9371.

* Protecting pre-coated sandwich panels on foaming lines - Novacel 9042 is a co-extruded adhesive film 33 micron thick.

This clear film is transparent and made with polyolefins.

Applicable at ambient temperatures, its satin finish shows off the surface of sandwich panels.

It is available in rolls of 4,921ft (1500m) and 9,842ft (3000m); so reducing the frequency of roll changes.

It is made in widths up to 102in (2600mm).

Novacel 9042 film is anti-UV treated and has an outdoor guarantee of three months.

* Protecting pre-coated metals - Novacel 4154 film has an environmentally friendly acrylic-dispersion adhesive.

It is specially designed to protect pre-coated metals through severe roll-forming processes and sandwich panel lines.

The film is 33 micron thick, transparent, made with polyolefins, anti-UV treated.

It is available in lengths of 4921ft (1500m) to 16,404ft (5000m).

It has an outdoor guarantee of three months.

* Protecting metallic and matte 'cool colours' lacquers - Novacel 9371 film is 35 micron thick, is made from polyolefins, and is transparent to allow rapid inspection of the protected surface.

This film is also anti-UV treated and has an outdoor guarantee of three months.

* About Novacel - world leader in protective films for industrial surfaces, Novacel is present on the five continents, in more than 60 countries.

Back to top