Product category:
CNC automatic lathes
News Release from: Citizen Machinery UK | Subject: Streamline Machining
Edited by the Manufacturingtalk Editorial
Team on 04 May 2006
Simultaneous cutting with two tools
'Streamline Machining' depicts the benefits achieved from the new control system, software and mechanical developments resulting in up to 40 per cent faster machining cycles.
'Streamline Machining' is a new term adopted by Citizen for its latest generation of CNC sliding head turn/mill centres that depicts the benefits achieved from the new control system, software and mechanical developments resulting in up to 40 per cent faster machining cycles than could be achieved using the same program and tooling on the previous generation machines At MACH 2006 on NC Engineering Stand 5262, the latest L20-VIII and K12 and K16 Citizen machines will be demonstrating the benefits of these new levels of flexibility and the ability to cut with two tools simultaneously at the main and subspindle involving single 'one-hit' cycles
This article was originally published on Manufacturingtalk on 28 Feb 2006 at 8.00am (UK)
Related stories
CNC automatic lathes focus on faster cycle times
'Streamline Machining' is a major factor influencing faster cycle times, by reducing the non-cutting elements, giving improved flexibility and introducing features to assist unmanned running.
Powered tooling and two Y-axis cross feeds scored
In a subcontrator's view, its latest mill/turn centre stands out for its powered tooling ability to mill and drill and in particular, through the added flexibility from its two Y-axis cross feeds.
Central to streamline machining is the Citizen software development for the new control systems.
The low-cost Citizen K12 and K16 machines have a special version of the latest Fanuc 31i Series control and the L20-VIII an advanced Mitsubishi 700 control.
Both the K and L ranges can perform with the involvement of up to five-axes with full synchronisation of the main and subspindles, direct spindle indexing that is able to pre-select the reference point of the C-axes even while the spindle decelerates.
Further reading
Two CNC lathes equate to eight cam automatics
When Target Sports bought its first Citizen B12 Type V, CNC sliding headstock lathe, it wanted to machine high quality brass dart bodies - it was quickly followed by a second machine.
Sliding heads raise productivity by two-thirds
To help meet growing demands for torque control tooling, MHH invested in two Citizen sliding head lathes from NC Engineering, and is now achieving an average 65 per cent higher productivity.
Sliding head lathe slashes cycle times
Dawson Precision Components of Oldham has acquired its first Citizen CNC sliding headstock lathe and has been able to allocate multiple-operation work into single set-ups.
This saves valuable time against the previous generation control operating routines that required the spindle to be stationary before the protocol sequence could seek the reference point.
What has to be considered is that many of the Citizen cycles used at customers involve considerable C-axis spindle positioning for cross drilling and milling.
Both machine types have had rapid traverse rates increased by 60 per cent to 32 m/min with the added advantage that acceleration and deceleration rates are improved by a factor of 1.6 on each axis.
By utilising the new shockless acceleration/deceleration curves, each machine is now able to give greater machining consistency with extended tool life and improved levels of surface finish.
Also, as a tool enters a cut, it is now able to overlap with the exiting tool that once again saves non-productive time and reduces any likelihood of vibration or pick-up on a machined surface as the new tool engages with the workpiece.
A further significant factor is idle time reduction on the new machines, especially when thread cutting and tool changing.
Here, the ability of the control to read ahead, enables the pre-emption of simultaneous axis movements.
The Citizen L20-VIII with a 20 mm capacity by 200 mm machining length can carry up to 21 tools with nine driven.
In recent trials a 240 second machining cycle was reduced to 164 secs - a 29 per cent saving.
At a UK customer, Unicut Precision of Welwyn Garden City, an L20-VIII was able to reduce cycle times against a previous L20 installed in the works, by almost a third.
The K12/K16 with 12 mm (1/2 inch) and 16 mm capacity will carry 19 tools with eight driven and compared to the B12 Citizen machine replaced at Tenable Screw of Merton, a K16-VII was able to reduce the cycle time on one part from 55 secs to 36 secs, a 35 per cent saving on each part produced. Request a free brochure from Citizen Machinery UK ...
• Citizen Machinery UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
