Product category:
Flexible machining cells and systems (FMS)
News Release from: NCMT | Subject: Makino MAG4 machining centres in FMC
Edited by the Manufacturingtalk Editorial
Team on 17 April 2003
FMC uses full 5-axis to machine wing
ribs
A flexible machining cell comprising two five-axis, horizontal machining centres and materials handling system is dedicated to the production of 40 of the 124 Airbus A380 wing ribs.
As part of a GBP 16.5 million investment in a new rib manufacturing facility at the Airbus site in Filton, near Bristol, a flexible machining cell (FMC) comprising two Makino MAG4 five-axis, horizontal machining centres linked by rail guided vehicle and served by a six-pallet handling and storage system was installed last year by UK distributor, NCMT The facility is dedicated to the production of 40 of the 124 wing ribs
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
HUD chassis lead-time cut by more than one half
The lead time for machining a head-up display (HUD) chassis has been reduced from 53 days to 20 by Thales Optics after installing an Okuma MA50 half-metre-cube, horizontal machining centre.
Getting gear blanks round and parallel
For successful gear manufacture, roundness and parallelism have to be very accurate, which is why motor sport gearbox maker, XTRAC, acquired Okuma CNC lathes for gear blank machining.
for the Airbus A380 superjumbo, which is scheduled to make its first flight in early 2005.
With ten major customers already committed to 103 aircraft and further orders expected, the FMC is set to be employed on A380 wing rib production for many years.
In addition, it is likely to be used to produce wing ribs for the new Airbus military transport aircraft - the A400M.
Further reading
Rotary coolant adapter avoids bearing wear
A rotary coolant adapter uses split construction to separate the bearing housing from the coolant collar to increase reliability over extended service life.
New low-cost lathe from Okuma
Okuma has introduced a 2-axis CNC turning machine, called Soarer L270E, which is the first of a new range from the Japanese manufacturer built to in-house standards under contract in Taiwan.
Machining centres developed for inconel grinding
Rolls-Royce has developed a new technique called Viper grinding for producing Inconel aircraft engine parts on a machining centre instead of on a creep-feed grinder
The first metal for the A380 wing was cut in August last year (2002) for one of the smaller ribs, measuring 2.2 metres long by 0.5 metres wide.
Production is well under way and the first batch will be completed on schedule in May 2003.
Prototypes for a further five families of ribs have already been successfully produced, the largest of which measures 3.1 metres by 2 metres.
All components are being made for the first time from a weight saving, high tensile aluminium alloy and, as with all airframe components, are being machined from solid billets using the advanced, full 5-axis positioning of the spindle.
The 'ship sets' of 40 ribs will be delivered to the Airbus factory at Broughton in North Wales for final assembly prior to shipment of the complete wings to the company's aircraft production line in Toulouse.
Chris Harland, Project Manager A380 Ribs, at Airbus's Filton site, said: "The rationale behind investment in a new rib machining facility was to compress lead-time for the A380 superjumbo project.
Each A380 rib enters the Makino FMC and emerges fully machined in less than two days, whereas using our previous production process which dates back 10 years to the production of Airbus A300 wing ribs, floor-to-floor time was considerably longer.
This was because it involved multiple set-ups on two or three machining centres and could involve significant work-in-progress between operations." The turnkey installation from NCMT comprises two identical Makino MAG4 horizontal machining centres linked by an in-line magazine with capacity for storing six pallets.
The pallet-picking crane runs on rails, linking the machining areas, the pallet storage area and a work-set station.
The latter is configured so that a pallet can swivel 90 degrees through a horizontal centreline, allowing ribs to be conveniently fixtured horizontally, after which the pallet is swung into the vertical plane for presentation to the machine spindles.
Once in the FMC, the ribs undergo three stages of machining - roughing, finishing, and final finishing - chips being removed by a separate 5,000 litre capacity swarf management system that removes particles down to 50 microns using a centrifuge before the coolant is recycled.
Orchestrating the cell is a computer controller that interfaces with the CNC systems on the machining centres, each of which has a working envelope of 4000 x 2600 x 700mm and a 120-tool magazine.
Either machine is able to complete the operations on all ribs, but a pallet at any given time may be routed to one or other MAG4 when it becomes free.
To help the operator see what is happening within the machining areas, two video cameras placed either side in each machine feed images to screens mounted by the central control monitor.
The status of the machines, as well as that of the components fixtured on the six pallets in the store, is known at all times by the controller, which schedules and prioritises the queue of work through the system.
The controlle r also monitors the life of the cutters, ensuring that sister tooling is available and that replacements are made as necessary.
ID chips are attached to each tool to assist in this process.
Gewefa heat-shrink toolholders ensure smooth running at high speeds, which is particularly important as the full 30,000 rpm capability of each machine spindle, designed and built by Makino, is used for the majority of the machining cycles.
Rated capacity is 60 kW.
All tools are preset, the cutter and toolholder being individually balanced before being placed manually in the magazine.
The wings for all Airbus aircraft are designed at Filton using the Catia CAD system.
Advanced computer-aided manufacturing software with feature-based recognition capabilities is employed to generate automatically the most efficient 5-axis machining strategies for removing large amounts of metal from solid billets, often leaving very thin walled features.
Continuous checking ensures there is no risk of collision between cutter and workpiece at the high feed rates employed.
ICAD software from Knowledge Technologies International acts as the 'brain' for the design and manufacturing process, storing the required knowledge and best practices relating to design intent, functionality, engineering and manufacturing rules, standards, safety codes, legislative compliance and other criteria.
By automating the process in this way, lead times are reduced dramatically.
A third MAG4, the Japanese manufacturer's European demonstrator, stands beside the FMC at Airbus, Filton.
It was used last year for process development and producing prototypes, and also allowed prove-outs to be completed before each new component entered production.
Furthermore, it continues to underpin the up-time guarantee given by Makino and NCMT.
At the supplier selection stage, a wide range of criteria was considered, which included service, support, spares availability and capacity contingency.
Makino / NCMT offered the best overall package, especially in the design and compactness of the spindle as well as its control system. Request a free brochure from NCMT ...
• NCMT: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
