Product category:
CNC turning centres, mill/turning, multi-tasking centres, horizontal and VTLs.
News Release from: NCMT | Subject: Okuma Multus B300-W mill-turn centre + B-axis
Edited by the Manufacturingtalk Editorial
Team on 23 November 2006
Mill-turn centre has B-axis for complex
work
A specialist sub-contract machinist has installed a a B-axis mill-turn centre to extend considerably the complexity of in-cycle prismatic machining that may be carried out.
Specialist contract machinist, PG Technology, has installed a B-axis mill-turn centre at its factory in Mitcham, Surrey Supplied by NCMT, the Okuma Multus B300-W is the first twin-spindle mill-turn lathe on site and increases the contract machinist's turning capacity to 630mm diameter by 900mm long
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
HUD chassis lead-time cut by more than one half
The lead time for machining a head-up display (HUD) chassis has been reduced from 53 days to 20 by Thales Optics after installing an Okuma MA50 half-metre-cube, horizontal machining centre.
Getting gear blanks round and parallel
For successful gear manufacture, roundness and parallelism have to be very accurate, which is why motor sport gearbox maker, XTRAC, acquired Okuma CNC lathes for gear blank machining.
It also extends considerably the complexity of in-cycle prismatic machining that may be carried out.
Business development manager, Clive Evans, stated, "The addition of the Okuma machine to our existing, high quality CNC turning department will give the company a strong competitive edge in the UK and Continental European market place." He added: "With the Multus, we can make in one operation components that are normally machined in three to four ops.
So we are able to be even more competitive in delivering the right price for our customers, with which we have built up excellent working relationships based on high quality and rapid delivery." Evans recently mentioned an aircraft hydraulics component in stainless steel that was previously quoted at GBP 118 and which could now be supplied for GBP 85.
Further reading
Rotary coolant adapter avoids bearing wear
A rotary coolant adapter uses split construction to separate the bearing housing from the coolant collar to increase reliability over extended service life.
New low-cost lathe from Okuma
Okuma has introduced a 2-axis CNC turning machine, called Soarer L270E, which is the first of a new range from the Japanese manufacturer built to in-house standards under contract in Taiwan.
Machining centres developed for inconel grinding
Rolls-Royce has developed a new technique called Viper grinding for producing Inconel aircraft engine parts on a machining centre instead of on a creep-feed grinder
There is a good chance that PG Technology will win this work next time around.
Another mill-turn job that will shortly take advantage of the 11kW milling spindle on the Multus is a stainless steel, eccentric cylindrical component that currently needs four operations on a lathe and a machining centre.
It will be machined in two operations and to very high accuracy, the position of some drilled holes being tied up to 3 microns relative to the bore centreline.
Installed at the end of August 2006, the Multus was first used for pure turning applications to give the operators a chance to familiarise themselves with the Okuma OSP P200L control and the machine's 7-axis CNC technology - X, Z, Y, B, C1, C2 and W (longitudinal travel of the opposed spindle).
On these jobs, the combination of the 15kW turning spindle, HSK A-63 tooling, 40m/min rapid traverse in X and Z and synchronous pick-up by the opposed spindle has on average allowed PG Technology to halve both the number of separate operations and manufacturing times, according to Evans.
Vincent Bootes, owner of PG Technology, commented, "I am delighted to support the company with substantial new investment in the latest technology when I see the enthusiasm and commitment of the business to progress and strive for the ultimate accolade of world class supplier." Concurrent with the new mill-turn centre installation, PG Technology purchased several seats of EdgeCam software, version 11, from Pathtrace to generate complex cutter paths.
A further development will be relocation of the factory in the first quarter of 2007 to new freehold premises nearby in Mitcham.
This will see the present 24h, 5 days/week operation go to 24/7 working, subject to recruitment of extra skilled people, which Evans complained is always a challenge.
He concluded, "The Okuma Multus has already strengthened production of rotational components.
It brings turning in line with the highly advanced machining centre capacity we have, which includes full 5-axis capability." "The only way to compete these days is to invest in modern, capable production equipment like the Okuma Multus and it does not stop there, as we are currently looking into another 5-axis milling centre.
It will help in our goal to become the best supplier in the UK of machined parts, on time and to the right quality. Request a free brochure from NCMT ...
Our traditional strongholds of supplying to the semiconductor, motorsport, aerospace and automotive industries are already starting to expand into the medical and defence sectors.".
• NCMT: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
