Product category:
Abrasive machining - manual and CNC machines
News Release from: NCMT | Subject: I-Grinder G5 VIPER process
Edited by the Manufacturingtalk Editorial
Team on 25 September 2007
Dedicated VIPER grinding centre is 10%
faster
For creep feed grinding of nickel alloy components in the 'VIPER' process, a purpose dedicated 7-axis machining centre is 10% quicker than the original modified horizontal machining centre.
Makino introduced its i-Grinder G5 at EMO 2007 It is designed specifically to exploit the VIPER technology to the full
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
HUD chassis lead-time cut by more than one half
The lead time for machining a head-up display (HUD) chassis has been reduced from 53 days to 20 by Thales Optics after installing an Okuma MA50 half-metre-cube, horizontal machining centre.
Getting gear blanks round and parallel
For successful gear manufacture, roundness and parallelism have to be very accurate, which is why motor sport gearbox maker, XTRAC, acquired Okuma CNC lathes for gear blank machining.
Until now, the platform used was a standard horizontal machining centre.
The HMC was extensively modified with very high-pressure coolant delivery to the vitrified aluminium oxide wheel via programmable nozzles and through the high-speed spindle.
The purpose-built, 7-axis machine was demonstated at the EMO 2007 exhibition by Makino-NCMT Grinding Division, a UK operation run by the Japanese manufacturer's sales agent.
Further reading
Rotary coolant adapter avoids bearing wear
A rotary coolant adapter uses split construction to separate the bearing housing from the coolant collar to increase reliability over extended service life.
New low-cost lathe from Okuma
Okuma has introduced a 2-axis CNC turning machine, called Soarer L270E, which is the first of a new range from the Japanese manufacturer built to in-house standards under contract in Taiwan.
Machining centres developed for inconel grinding
Rolls-Royce has developed a new technique called Viper grinding for producing Inconel aircraft engine parts on a machining centre instead of on a creep-feed grinder
The company has acquired a reputation as world leader in the research and development of the superabrasive process.
Consequently, the company has been made responsible for VIPER machining centre sales for not only in the UK, but also across Europe and Scandinavia.
Overall, the i-Grinder G5 is 10% quicker at machining nickel alloy components than the modified Makino A55 machining centre that it supersedes.
Metal removal rate is of the order of 80 cc/min.
The machine accepts parts nominally up to 300mm in diameter and was sen by Manufacturingtalk at EMO grinding the fir tree root form of a power generator blade close to the maximum capacity.
The enhancement in grinding efficiency comes from a number of factors, including an increase in linear rapid traverse rate from 40 to 48m/min.
Faster rotary workhead speed, which has more than doubled to 100 rev/min, is especially beneficial when grinding smaller components.
Manual access to the working area from the front of the machine has been improved to allow the operator to exchange components and dressing rolls more easily.
Automated loading and unloading is optional.
* Programmable coolant nozzles - probably the most critical improvement, however, is in the design of the programmable coolant nozzles.
They are more versatile on the i-Grinder G5, as they may be positioned by two rotary NC axes anywhere through 360 deg around the periphery of the grinding wheel, rather than through just 180 deg, as was the case with the A55.
To achieve this greater degree of freedom, power and coolant supplies are built-in, rather than being delivered through an umbilical cord.
Nozzle positioning speed is faster and therefore more responsive when changing position to direct coolant accurately towards the point of cutting.
A big advantage of VIPER grinding on a horizontal machining centre is that in addition to abrasive wheels, other live and static tools such as milling cutters, drills, broaches or turning tools may be exchanged automatically between the tool magazine and the spindle, allowing additional machining operations to be carried out in the same cycle.
The i-Grinder G5 has a 60-tool magazine capable of holding 20 grinding wheels up to 220mm diameter.
Any number of wheels can be sacrificed to allow conventional milling or drilling tools to be deployed, allowing full advantage to be taken of the machine's multi-functionality.
As with all VIPER-specification machining centres, i-Grinder G5 has three linear axes and two rotary axes as well as the two axes for positioning the coolant nozzles.
Reinforced guarding, specially designed covers, pressurised rather than grease lubrication of the slideways, a double coolant filtration system, and positively pressurised electrical cabinets are all standard features to prevent ingress of dirt and contaminants.
* Machines sold - even before the EMO show, i-Grinder G5s had been sold by Makino to a major aero engine manufacturer in Japan and by Makino-NCMT Grinding Division to one of the largest manufacturers in Europe of compressor and turbine blades, and BLISKs.
In addition to the machining of aerospace and land turbine components, VIPER grinding is also suitable for cost-effective manufacture of medical implants, especially as their increasing complexity is making manufacture more difficult on conventional or modified tool and cutter grinders.
Related technologies that have been developed by Makino-NCMT to achieve world class process capability and throughput include EasyGrind and EasyGear programming software, flexible fixturing, and manual or in-cycle part measurement, verification and truing.
* About VIPER grinding - VIPER grinding is a production process patented by Rolls-Royce that employs a machining centre for creep feed grinding of nickel alloy components for the 'hot' end of gas turbine engines.
It has been an international success since its introduction in 2001.
It has proved to be much faster than all of the machining techniques it was introduced to replace, namely CBN grinding, broaching, milling and turning. Request a free brochure from NCMT ...
• NCMT: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
