JD Neuhaus
8 Herald Business Park
Golden Acres Lane
Coventry
CV3 2SY
UK
Latest articles from this company
News releases from this company
Neuhaus manipulator has 250kg lifting capacity
The Profi 025 Ti hoist unit is equipped as a manipulator to facilitate single-handed operation for load lifting, lowering, positioning and manual traversing (when used with an overhead trolley).
News from Manufacturingtalk, 3 June 2009
Hoists allow smooth start/stop operations
JD Neuhaus has added two air-operated hoists, featuring a high-performance vane motor with a 2kW rating, to its Profi range.
News from Manufacturingtalk, 14 May 2009
Winches offer more pulling power
Profi Puller winches from Neuhaus now offer pulling power of up to 3,500kg, increased from a previous limit of 3,000kg.
News from Manufacturingtalk, 4 March 2009
Air-operated monorail hoists have upgraded motors
Neuhaus has launched air-operated monorail hoists featuring upgraded air motors, which can be customised with additional accessories to suit specific industry challenges.
News from Manufacturingtalk, 9 February 2009
Air-powered hoists suit big-bag handling
Twin Profi 2 Ti air-operated hoists from JD Neuhaus have been used to facilitate safe and efficient product discharge from big-bag containers.
News from Manufacturingtalk, 2 October 2008
Air-operated hoists make tank-cleaning safer
J D Neuhaus air-operated hoists, featuring precise load positioning control via pendant hand controllers, have been successfully trialled for cleaning operations on road and rail-transit tankers.
News from Manufacturingtalk, 3 September 2008
Air hoists meet food industry hygiene standards
J D Neuhaus is now supplying air hoist products to comply with the cleaning and hygiene levels for food industry installations and withstand wash down conditions.
News from Manufacturingtalk, 7 August 2008
Neuhaus compact lifting equipment is light
A wide range of compact lifting equipment by J D Heuhaus is lightweight enough to provide portable material handling that complies with current safety and working practice regulations.
News from Manufacturingtalk, 9 April 2008
30tonnes hoist used for string weighing
An air operated hoist has been used for the safe and successful handling of an assembled pipeline string of some 1000m in length.
News from Manufacturingtalk, 10 December 2007
Air-operated monorail hoists work reliably
Air-operated monorail hoists work reliably and safely when working in conditions of high humidity, dust laden atmospheres and even hazardous areas, claims the manufacturer.
News from Manufacturingtalk, 3 September 2007
Smaller, lighter lever blocks are stronger
The small-but-strong Kito L5 range of lever blocks from J D Neuhaus are suitable for load tie-downs in transportation applications or lifting and pulling operations in engineering etc.
News from Manufacturingtalk, 4 June 2007
Electric chain hoists for demanding environments
J D Neuhaus has introduced the Kito ER series of electric chain hoists suitable for a wide range of general industrial, engineering and otherwise demanding work environments.
News from Manufacturingtalk, 9 May 2007
High-tech hoists now include hydraulic options
Hydraulically operated versions from the mid-range of its Profi Ti air hoists can now be supplied by J D Neuhaus.
News from Manufacturingtalk, 18 January 2007
Guide drum grooving extends winch rope life
Optional rope guide drum grooving is now available for the air operated winches to eliminate excessive wire rope wear as a result of random or zig-zag pattern rope layering.
News from Manufacturingtalk, 23 November 2006
Compact, lightweight manual chain hoist
J D Neuhaus is now able to offer its latest CX003 ultra compact, lightweight manual chain hoist, which has a lift capacity of 250kg.
News from Manufacturingtalk, 26 October 2006
Compact unit added to winch range
With a compact design and all-up weight of approximately 30kg, this unit provides a pulling capacity of 530kgf on the fifth rope layer, with a full 800kgf on the first layer.
News from Manufacturingtalk, 21 September 2006
Tuggers move air conditioning, chiller assemblies
Pedestrian-operated, electric tuggers improve shop-floor productivity and eliminate the risks of manual handling and take the place of larger, more expensive fork lift/tractor units.
News from Manufacturingtalk, 13 September 2006
Mini manipulator makes light work of small loads
Latest work handling unit, a small manipulator has a lift/lower control mechanism incorporated with the lifting hook, to offer single handed operation providing safe, precise work handling.
News from Manufacturingtalk, 25 August 2006
Low headroom trolley hoists move larger loads
Low headroom trolley hoists have been re-designed with horizontally rather than vertically mounted hoist units to give additional height to safely move and manoeuvre larger loads.
News from Manufacturingtalk, 7 August 2006
Handling equipment works in hazardous areas
Air operated handling equipment is use in hazardous areas and includes explosive atmospheres and operating in dust, humidity, aggressive atmospheres and even temperature extremes.
News from Manufacturingtalk, 26 June 2006
Not what you're looking for? Search the site.
Featured articles
-
Micro-Epsilon introduces Scancontrol 2710 sensor
The latest addition to Micro-Epsilon's Scancontrol range of 2D/3D laser profile sensors is the Scancontrol 2710, which is compact and offers new setup and configuration software.
-
IFM unveils OBF500 range of fibre-optic amplifiers
Long sensing ranges and fast switching characterise the OBF500 series of fibre-optic amplifiers from IFM Electronic.
Categories
- Machine Tools: Cutting (4,191)
- Machine Tools: Metalforming, shearing, folding and punching (1,647)
- Machine Tools: moulding (1,177)
- Cutting tools (1,971)
- Welding and Joining (1,590)
- Finishing, preparation, coating and painting (1,145)
- Automation, assembly systems and computer systems (1,293)
- Manufacturing support (9,130)
- Industry news, commerce, exhibitions, education (8,502)
- Packaging (2,889)
- Specialist Manufacturing Sectors and Metals Producing (1,403)
- Books, CDs and Videos (213)
- IT for manufacturing management and production (4,072)
- IT for engineering, industrial and commercial applications (2,726)
- Used machinery and machine tools (37)
- Materials handling and storage (1,041)
- Wood and non-metallics working (79)
- Metrology instruments and systems (3,890)
- Testing and quality control systems and services (5,252)
- Subcontracting services (1,262)
