Product category:
Cranes, hoists, winches, chains and ancillaries
News Release from: JD Neuhaus | Subject: Profi 500/750 air winch
Edited by the Manufacturingtalk Editorial
Team on 31 May 2006
Air winch powerful enough for loads to
750kg
The new Profi 500/750 air winch from J D Neuhaus weighs in at less than 30kg, but is still powerful enough for loads up to 750kg.
The new Profi 500/750 air winch from J D Neuhaus weighs in at less than 30kg, but is still powerful enough for loads up to 750kg With an approximate 65% weight saving over a product being replaced (Profi 500/800), the new winch offers considerable potential as a mobile unit capable of wide ranging lifting and pulling operations
This article was originally published on Manufacturingtalk on 31 May 2001 at 8.00am (UK)
Related stories
Cranes work in hazardous environments
Cranes designed for safe operation, in the chemical industry or wherever the lifting or transportation of loads in hazardous atmospheres are envisaged, can be supplied by J D Neuhaus.
Ultra-low headroom on chain hoists
A range of monorail mounted chain hoists from J D Neuhaus minimise the 'dead space' between the underside of the monorail track and the load point of the carrying hook
A modern, compact low profile design, the Profi 500/750 features the well proven JDN vane motor with internal brake which requires no additional air lubrication and offers performance with high reliability.
The gear train is subject to exhaust-air cooling, providing both 100% duty time and minimum maintenance requirements.
The powerful pneumatic drive can be safely operated in areas such as the oil, gas and chemical industries, or wherever potentially explosive atmospheres may be encountered.
The rugged construction also ensures that the winches can withstand operation within dusty or dirty conditions throughout industry.
The products carry an Ex hazardous area classification Ex II 3 GD IIA T4(X).
The winch is fitted with a pendant controller providing direct sensitive control over the lift/lower/pulling operations.
High rope capacity is also provided with up to five layer spooling of wire rope in diameters from 5.5 to 7mm.
Operation is from a six bar air supply, with low air consumption and minimum noise levels, leading to high acceptance in normal as well as abnormal working conditions.
• JD Neuhaus: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
