Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: NSF Controls | Subject: Servo Linear Positioner system
Edited by the Manufacturingtalk Editorial
Team on 13 March 2003
Short stroke actuator positions finely
Meeting a long-standing requirement for a short stroke actuator with ultra-fine positional control a servo linear positioner system is an integrated, responsive linear actuator and position sensor.
West Yorkshire-based NSF Controls is set to launch an exciting breakthrough in short stroke actuator technology with the development of a Servo Linear Positioner (SLP) system Embodying a number of innovative and patented features, the SLP is an integrated and highly responsive linear actuator and position sensor contained within a single, compact unit
This article was originally published on Manufacturingtalk on 19 Jun 2003 at 8.00am (UK)
Related stories
Handwheel gives fine incremental positioning
A magnetically indexed, ultra-fine positioning electronic handwheel is a rotary encoder capable of ultra-fine positional accuracy with 2 x 100 rectangular impulses per output.
3D models of off-the-shelf telescopic slides
Telescopic ball bearing slide designer and manufacturer, Accuride International, has produced optimised 3D models of its 'off-the-shelf' products which can be downloaded via its website.
The design meets a long-standing requirement for a short stroke actuator with ultra-fine positional control.
Designers have previously chosen from a relatively limited selection of technologies to meet this requirement.
Typically these would be solenoids, moving coil motors, motorised screw units or pneumatic cylinders.
Further reading
Full digital set-up on tension control system
A new digital tension controller is claimed to be one of the most comprehensive tension control systems currently available
Differential drives offer intelligent phase shifts
Using the advantages offered by differentials companies operating in industries such as printing, packaging and labelling can expect to make significant gains.
Temperature transmitter used in hazardous areas
Foundation Fieldbus temperature transmitter for hazardous areas is a head mounted device that can be installed into an existing enclosure providing the opportunity for cost savings.
None of these technologies approach the combination of performance and functionality afforded by the SLP - and few rival it for cost.
The SLP system owes its uniqueness and exceptional functionality to a compact and rugged moving magnet design, which, using an innovative dual function configuration of windings, creates both a high efficiency linear thrust motor and a fully integrated, high performance absolute position sensor.
The integrated sensor/actuator arrangement results in a compact assembly with a minimal number of electrical connections and a mechanically simple moving part.
The unit is also electrically symmetrical which contributes to highly stable temperature performance as well as making it extremely easy to design into a given application.
The SLP is extremely easy-to-use, offering direct digital or analogue control through a simple, adaptable interface.
The SLP is also easy-to-install, with direct coupling to driven parts and a straightforward, four-wire connection.
Direct coupling also gives continuous wear free operation even under the most arduous conditions, while the SLP is adaptable for operation in the most extreme environments, such as cryogenic temperatures and high vacuum.
Another outstanding feature of the SLP is its accuracy and controllability, with positional resolution to 1.0micron (depending on stroke range), and a response time of 10 to 20ms.
Actuator response and load forces are monitored continuously in real time and the SLP is truly multi-functional, able to operate as an actuator, sensor or position controller.
In addition to its capabilites for replacement or upgrade of designs using existing technologies, the SLP with its unique sensory feedback capabilites, opens up unlimited design possibilities.
Such designs include: the upgrade of solenoid applications for controllability of movement or elimination of impacting; valve and regulator control applications with real time system conditioning or fault monitoring; remote/high reliability actuators operating in hazardous environments or extremes of temperatures; variable displacement pumping and metering system actuators, and servo force transducers.
Potential areas of application for the SLP include test/measurement and instrumentation, medical, acoustic control, machine tools, process equipment, robotics, probing, automotive and aerospace. Request a free brochure from NSF Controls ...
• NSF Controls: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
