Product category:
Bearings and guideways - rotary and linear
News Release from: NSK UK | Subject: Roller bearings
Edited by the Manufacturingtalk Editorial
Team on 08 January 2007
Pin-cage design for roller bearings
NSK has developed tapered roller bearings and cylindrical roller bearings with new pin-type cages that have up to six-times the strength of conventional cages against the effects of shock loads.
NSK has developed tapered roller bearings and cylindrical roller bearings incorporating new pin-type cages that have up to six-times the strength of conventional cages against the effects of shock loads The bearings are made of a new bearing material called SAC steel, which can offer long bearing life in harsh environments such as steel and aluminium mills, where bearings are exposed to wear particles from the gear teeth of large gearboxes
This article was originally published on Manufacturingtalk on 3 Oct 2001 at 8.00am (UK)
Related stories
Seals extend mill roll bearing life
A seal bearing technology, which extends the life of four-row sealed tapered roller bearings used on roll necks of rolling mills, is described by Andrew Dodd of NSK's European Technology Centre.
Material allows stronger, quieter roller bearings
The combination of a new, "patent-pending", cage material and an increased roller complement have given 20% higher load capacity, quieter operation (up to 7db lower) and lower temperature running.
NSK has developed the new cage design and material specification for the tapered and cylindrical roller bearings as a means of addressing the problems of maintenance on large gearboxes in rolling mills.
The sheer difficulty of removing and maintaining such large gearboxes, and the costly downtime commensurate with such maintenance, places the onus on components such as bearings to provide ever increasing levels of reliability and operating life, qualities that the pin- cage bearings have been designed to provide.
This new type cage eliminates any clearance between the pin and the cage side plate, which is found in conventional pin-type cages.
Central to the design is a pin that runs through the bore of each roller.
The pin works to maintain clearance between the roller and the cage, and spaces the rollers equally apart from each other.
This newly developed design helps to improve cage strength by reducing force that would normally be applied to the welded areas of the cage side plate under operating conditions where large impact loads result from rapid acceleration and deceleration.
Tests have shown that the durability of this new cage is up to six times longer than that of conventional cages, and achieves higher reliability.
Complementing the performance of the pin cage design is NSK's SAC steel.
Unique to NSK, this bearing material provides enhanced durability against exposure to wear particles from the reduction gears.
Test results show that bearings made from SAC steel have twice the service life of bearings made from conventional bearing steel. Request a free brochure from NSK UK ...
• NSK UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
