Product category:
Industrial networking and communications
News Release from: ODVA | Subject: Integration of Modbus devices into CIP
Edited by the Manufacturingtalk Editorial
Team on 04 December 2007
Integrating Modbus devices into CIP
architecture
Completion of specifications gives existing Modbus/TCP users a clear path to CIP Network architectures while protecting their automation investments.
ODVA has published the specifications for the integration of Modbus devices into the Common Industrial Protocol (CIP) architecture Published in The CIP Networks Library of specifications, the extension provides seamless access from CIP originator devices to Modbus target devices consistent with the existing CIP model
This article was originally published on Manufacturingtalk on 7 May 2008 at 8.00am (UK)
Related stories
One standards development group covers CIP
ODVA is now the single standards development organisation responsible for developing, managing and promoting the adoption of the Common Industrial Protocol (CIP) and CIP networks.
Ethernet guide introduces infrastructure
A network infrastructure guide for EtherNet/IP provides an introduction to the network infrastructure and gives users a framework for identifying the critical considerations.
It provides a standard translation of a subset of CIP functions into the appropriate Modbus functions.
First announced in April 2007, this concept was brought to fruition through the efforts of the 20 ODVA member companies participating on ODVA's Modbus Integration Joint Special Interest Group (JSIG).
Completion of this extension gives existing Modbus/TCP users a clear path to CIP Network architectures while protecting their automation investments.
Further reading
New publications for CIP network product family
EtherNet/IP, DeviceNet, CompoNet, ControlNet and CIP Safety updates included in latest editions of CIP network specifications
Sensor and actuator network standard released
CompoNet offers quick and easy installation using cost-effective flat network cable with pressure-clamping IDC connectors
Network development focuses on sensors, actuators
Plans for a new project to develop a network, using the media-independent, Common Industrial Protocol, targeted at simple sensors and actuators.
Users will benefit through significantly increased interoperability between the largest installed base of industrial Ethernet networks - EtherNet/IP and Modbus/TCP - as well as between automation products from a growing number of vendors.
Combined, these benefits will reduce cost, time and risk for users deploying and maintaining their network architectures, said ODVA.
This extension requires no change to existing Modbus/TCP target devices or EtherNet/IP target devices in order to take advantage of the seamless connectivity offered.
In addition, no changes are required for installed CIP-Modbus gateway devices.
"This new functionality can be implemented in a gateway device or in a CIP originator, and the translation function uses existing CIP Parameter and Assembly Objects," said Todd Snide, chair of ODVA's Modbus Integration JSIG.
"This extension allows existing vendor-specific CIP-to-Modbus/TCP gateway products to work without change; however, those vendors and users who take advantage of this extension will see an automatic translation that is not similar to the traditional gateway approach: the enablement of a seamless virtual CIP router, allowing CIP messages to be directly sent to Modbus/TCP target devices.".
Executive director of ODVA, Katherine Voss, said: "The integration of Modbus devices into the CIP architecture provides users with two key benefits: the ability to protect their investment in their existing automation installations and a seamless migration path for their next generation network architecture." She added: "Users who take advantage of the benefits of the integration of Modbus devices into the CIP architecture will be well positioned to reap increasing benefits from the return on investment provided by CIP and industrial Ethernet".
EtherNet/IP was introduced in 2001 and has more than 1.4 million installed nodes.
EtherNet/IP and Modbus/TCP are the two most popular industrial Ethernet protocols, representing over 50% worldwide market share, according to the most recent market study from ARC Advisory Group.
Products incorporating this new functionality are anticipated to be on the market in 2008.
In addition, the development allows for seamless CIP-to-Modbus serial line communication in a future revision of the specifications of The CIP Networks Library.
* About ODVA - ODVA, founded in 1995, is an international association comprised of members from the world's leading automation companies.
Collectively, ODVA and its members support network technologies based on the Common Industrial Protocol (CIP).
These currently include the network adaptations of CIP - EtherNet/IP, DeviceNet and CompoNet - and major application extensions to CIP - CIP Safety, CIP Motion and CIP Sync.
ODVA manages the development of these open technologies, and assists manufacturers and users of CIP Networks through tools, training and marketing activities.
In addition, ODVA offers conformance testing to help ensure that products built to its specifications operate in multi-vendor systems.
ODVA also is active in other standards development organizations and industry consortia to drive the growth of open communication standards.
• ODVA: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
