Product category:
Factory data acquisition
News Release from: Omniflex (UK) | Subject: Maxiflex CPUs
Edited by the Manufacturingtalk Editorial
Team on 17 April 2003
Data acquisition CPUs plug in and are
ready to go
CPUs intended for data acquisition and telemetry applications require no user programs. Simply plug them in, connect field wiring and power up.
Omniflex has recently launched a new set of Maxiflex CPUs - the T1 and now the T2 These CPUs are intended for Data Acquisition and Telemetry Applications
This article was originally published on Manufacturingtalk on 15 Apr 2004 at 8.00am (UK)
Related stories
Server upgrade handles date and time of events
Server upgrade handles date and time stamped events from source and ensures review of sequence of events before an alarm or trip and see what chronological order events occured in.
Optical pyrometer signals linearised
Programmable universal transmitter easily linearises optical or radiametric pyrometers to the temperature scale so that a panel meter reads in, say, degrees Celsius.
They require no user programs when used for Data Acquisition or Telemetry application.
Simply plug them in, connect field wiring and power up.
All I/O is scanned automatically and I/O status assembled into Data Interchange Table(DIT).
Further reading
Annunciator replacement introduced
The Omni30 Annunciator has been designed as a replacement for the obsolete RIS UC30 series products.
HART network interface module connects 30 devices
A HART network interface module allows the connection of up to 30 Hart enabled devices to it, making it ideal for the data acquisition environment.
For digital inputs and standard analogues the input status requires no configuration at all, however temperature inputs like Thermocouple and RTD require the sensor type to be configured providing input values in engineering units of degC or degF.
Scaled Analogue Inputs can also be catered for eliminating the need for the HMI to do any scaling to engineering units for 4-20mA loops from the field.
Adding I/O to the system has never been easier simply plug in the new modules (hot plug-in - plug in while system is live) and plug-in the detachable wire terminals from the field.
The new field I/O status is added to the DIT automatically.
Configuration is easily made using a free Windows based software package called "OmniSet.
and a serial cable available from Omniflex.
Simple selection of pull down options allows the user to configure the CPU completely.
This configuration includes the ability to create multi-drop telemetry systems using the Omniflex CONET Local Area Network up to 10km on twisted pair cable.
Configuration can also be done via the HMI if so desired making a neatly integrated system controlled exclusively from the HMI stations.
The HMI is simply connected to the Maxiflex T1 or T2 CPU via it's auxiliary serial port which can be set to communicate using Modbus Protocol, one of the standard protocols on every HMI.
The HMI now has access to any of the DIT registers on the CPU.
In fact if a Conet Local Area Network is used any data from the Network is also accessible to the HMI - not just the local node.
Multiple HMIs can also be connected to the Network in the same fashion reading the same or different data from the network.
Outputs may also be generated from the HMI to activate plant devices.
Maxiflex provides a very cost effective solution to HMI front ends and simplifies the field I/O systems by eliminating the need to write time consuming application programs for Data Acquisition or Telemetry.
Maxiflex I/O systems cover Analogue Inputs, Voltage, Current, Thermocouple, RTD and Digital Inputs, potential free and voltages up to 200VDC, series contact chains, pulse inputs up to 50kHz.
Interfacing to third party RS232 or RS485 devices is a specialty with Analytical devices like Gas Chromatographs, Gas Analyzers, Intelligent circuit breakers or Substation energy metering equipment etc.
Given the communication protocol Maxiflex will communicate with any of these devices.
The Conet Network Topology can be used as a BUS, Star or mixed configuration allowing complex networks to be configured all on low grade plant cables. Request a free brochure from Omniflex (UK) ...
• Omniflex (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
