Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Parker Hannifin | Subject: ViX Microstep microstepping motor drive
Edited by the Manufacturingtalk Editorial
Team on 28 May 2003
Current control enhances torque-speed
envelope
Innovative current control enhances torque-speed envelope for optimum performance and reduces settling time by up to 75% - increasing production throughput rates Parker Hannifin's Electromechanical Di
Parker Hannifin's Electromechanical Division has extended its award-winning ViX product range with an all-digital, intelligent, microstepping motor drive The brand new ViX Microstep packs an advanced motion controller with either a 250VA or 500VA power amplifier into an ultra-compact case - providing a building block that can boost automation throughput while simultaneously reducing system size and cost
This article was originally published on Manufacturingtalk on 28 Jul 2008 at 8.00am (UK)
Related stories
Rodless cylinder improves air efficiency
Parker Hannifin's mechanically coupled P1T rodless cylinder offers production engineers the potential to improve the performance and flexibility of pneumatic systems.
Triple vane hydraulic pump is compact
A triple vane hydraulic pump, with high pressure ratings of up to 275 bar, offers high performance and long, low maintenance service life.
The raw performance of the power stage is intelligently controlled using innovative new digital signal processing techniques developed by Parker.
Advanced field-orientated control (FOC) is applied to the digital current loop to enhance the torque-speed envelope.
This has the effect of eliminating 'midrange instability', and reducing torque ripple - leading to improved low-speed smoothness.
Further reading
Hydraulics system sensors are very compact
A range of pressure, temperature, accelerometer, proximity, rotary and tilt sensors are extremely compact and lightweight, and meet the specific needs of the mobile sector.
Filter cartridges cut operating costs
A range of filter cartridges is designed to help engineers make significant reductions in installation, maintenance and operating costs.
Hydraulic repairs firm grows with business service
Two business services from Parker Hannifin, Doctor and ParkerStore, are playing a key role for hydraulics repair company Mend-a-Hose Hydraulics in Yorkshire, UK.
Furthermore, Parker's innovative 'intelligent damping' control typically reduces settling time by up to a factor of four - significantly enhancing throughput for precision equipment OEMs.
ViX Microstep drives are packaged in the same exceptionally compact book-style housing as the ViX servo drive - measuring just 125 X 42 X 85 mm - for direct panel mounting, or attachment to a standard DIN rail using an optional adapter.
The drive is available with a choice of 2.8Arms or 5.6Arms output current ratings, and accommodates motor bus voltages up to 80VDC.
To ensure smooth operation at all times, the power stage operates at its full 51,200 step/revolution resolution regardless of the actual steps/rev programmed by users.
Moreover, the user resolution is freely-programmable in the range from 400 to 51,200 steps/rev, allowing the motion system to be matched precisely to the mechanics, even where there is an odd transmission ratio or leadscrew pitch.
ViX Microstep drives can be commanded directly from a PC, a centralised control system generating industry-standard step-direction signals, or optionally a fieldbus system.
In addition, ViX Microstep drives will operate autonomously using motion control programs stored within their powerful built-in controller - these may be executed in response to external events, or signals from a host controller such as a PLC.
The built-in controller uses Parker's well-proven EASI command language, and supports all standard motion control functions.
In addition, a number of advanced functions such as electronic gearing, registration, closed-loop position maintenance and stall detection are offered.
The controller is equipped with an RS232C interface as standard, and optionally a fieldbus interface for CANopen and RS485 communications.
Standard I/O facilities include 5 digital inputs and 3 digital outputs, all of which offer software-configurable termination characteristics and 5V or 24V operation.
Rapid system configuration and programming of ViX Microstep drives is achieved by using Parker's EASI front-end software package.
This powerful Windows-based software tool makes extensive use of guided-wizards and simple hierarchically-structured pull-down menus to simplify configuration and programming.
When the drives are used with Parker stepper motors, users only need to select the motor from a menu to define the entire configuration; all set-up information is retrieved automatically from a built-in database, which includes the facility to add additional motors from other vendors.
The drive automatically optimises FOC control according to motor parameters that are entered either directly, or through selecting the appropriate motor model using EASI software.
This enables a wide range of motors to be accommodated without compromising performance.
The result is unsurpassed torque/speed performance, smooth and resonant-free operation at low speed, reduced torque ripple and significantly reduced settling times -- permitting increased production throughput - together with improved efficiency and quieter operation.
ViX Microstep drives complement Parker's existing range of ViX servo drives and accessories.
By providing a drive range with a common programming language, front-end tools and compact book-style package, Parker helps OEMs to minimise systems costs when configuring multi-axis automation, and creating machinery ranges. Request a free brochure from Parker Hannifin ...
• Parker Hannifin: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
