Product category:
Fast prototyping equipment, pattern-making and services
News Release from: Paragon Rapid Technologies | Subject: Multi-material injection moulding simulation
Edited by the Manufacturingtalk Editorial
Team on 13 September 2005
Multi-material injection moulding
simulated
Two-shot vacuum casting involves a four step process to simulate multi-material injection moulding to produce a range of prototype radiation detection devices.
Paragon Rapid Technologies has produced a range of prototype radiation detection devices using its advanced two-shot vacuum casting process Paragon was selected as the preferred prototype supplier to Cambridge Design Partnership in the development of the first Isotopic Personal Dosimeter (IPD) for the first response market
This article was originally published on Manufacturingtalk on 5 Oct 2006 at 8.00am (UK)
Related stories
RP produces LED flood light components
In addition to field trials and testing, the lighting RP units were so visually representative of production parts that full assemblies were used for the production of photographs for marketing.
Product gets reduced time to market
When Blue-i UK had the idea to produce an innovative new industrial flood-light, utilising the latest LED technology.
Existing radiation monitors used by the Fire Service were sometimes impractical and this new pocket sized IPD is designed to be wearable and capable of detecting a broader range of radiation more accurately.
The product measures the intensity of incident radiation through a cadmium-telluride pixilated sensor.
Paragon produced a range of prototype models of the main casing including SL models for evaluation and then two-shot vacuum castings for marketing and field trials.
Further reading
RP/RM firm expands vacuum casting capacity
Rapid prototyping/manufacturing firm has invested in an extension chamber for its vacuum casting machine enabling it to produce parts up to 1720mm x 820mm x 450mm and weighing up to 5kg.
Technique simplifies production leak testing
Leak test technique simplifies and increases production leak test repeatability and selects the ideal fill and stabilization times based on the volume and temperature of the product.
Two-shot vacuum casting simulates multi-material injection moulding and, according to Paragon's Phil Adamson, has always been perceived as a technical challenge by many prototyping companies.
Alignment between the substrate and elastomer parts is often difficult and this, coupled with other problems such as coloured substrates showing through the rubber parts, often leads to impractical scrap rates of up to 30 or 40%.
Adamson and his partner, Peter Humphrey, therefore decided to invest substantial R and D time in developing, refining and testing their own multi-step process, particularly the production and setting up of the silicone tools, so they could guarantee high quality prototypes for their clients.
Paragon's two-shot vacuum casting involves a four step process, commencing with the production of two SL models - the first of just the rigid element of the component and the second of the complete component.
These models are then finished to an exceptionally high standard.
Silicone tools are then produced of both models using special tooling techniques developed by Paragon to ensure faultless filling and venting.
Rigid parts are then vacuum cast in the normal way, in the case of the IPD using ABS and Polycarbonate simulants.
Then, again using positioning techniques developed by Paragon, the substrate parts are located into the combined tool for overmoulding with a PU rubber.
In addition to the IPD, Paragon have produced other flawless two-shot vacuum cast parts to simulate multi-material injection moulding, including a variety of electronic enclosures, razors, mobile phones and soft grip handles for power tools.
• Paragon Rapid Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
