Latest news on Manufacturingtalk categorised by supplier
P and M Regrinds
Address:
UNIT 9 Dashwood Avenue
Britannia Industrial Park
High Wycombe
HP12 3ES
UK
Telephone: (UK) +44 1494 437949
http://www.pmregrinds.co.uk
Our RSS feed for news from P and M Regrinds
Request to receive our free email newsletter each week
Listing of all 11 news releases from P and M Regrinds:
Carbide end mills have stronger cutting edges
Carbide end mill cutters that feature AlTiN coated with a cam relief cutting edge increases the strength of the tools' cutting edges.
News from P and M Regrinds (10 August 2007)
How well do you point your drills?
Technical background article Most engineers appreciate the problems caused by inaccurate pointing when regrinding drills, and P and M Regrinds offers some tips to avoid drill inaccuracies.
News from P and M Regrinds ( 2 August 2007)
Routers give clean finish in abrasive materials
Straight two flute professional router cutters give a clean finish in abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
News from P and M Regrinds (20 October 2006)
Roughing end mills machine steels and NF
Roughing end mills are available in a variety of side-cutting and center-cutting styles for machining aluminum, steel, stainless steel, titanium, cast iron, and all commonly used alloys.
News from P and M Regrinds ( 5 October 2006)
End mills satisfy higher speed CNC machining
With CNC machines being able to run at greater speeds and feeds, it is necessary to utilize cutting tools, such as carbide end mills, that are able to run at increased operating parameters.
News from P and M Regrinds ( 3 July 2006)
Tap regrinding for good thread cutting
The cutting edges of a tap become dull during cutting at a rate dependent on cutting conditions and the material being cut.
News from P and M Regrinds ( 2 June 2006)
Carbide tip saw blades reground reliably
Regrinding of carbide tip saw blades requires knowledge, maximum attention and most important, the proper machines if you want to keep down the cost of your tools.
News from P and M Regrinds (21 April 2006)
Restoring cutting tools to pristine condition
Unlike many sharpening businesses, a cutting tool regrinding company carefully analyzes the problem first to determine whether the tool is simply dull, or is also bent or heat-damaged.
News from P and M Regrinds (21 April 2006)
Carbide routers machine plastics, composites
Single-flute end mill geometry avoids chip melting and chip re-welding problems when machining plastics and composites and cutter diameter and flute lengths are made to users' designs.
News from P and M Regrinds (21 April 2006)
Variable pitch saw blades run quieter, faster
A range of variable pitch, high speed steel saw blades are claimed to operate faster and quieter than constant pitch blades and the variable pitch blades offer increased blade life.
News from P and M Regrinds (13 April 2006)
All types of cutting tools reconditioned, ground
UK tooling company offers a reconditioning service of all types of engineering cutting tools, milling cutters, HSS, carbide tooling and side and face cutters, which can have tool coating applied.
News from P and M Regrinds (29 March 2006)
