Latest news on Manufacturingtalk categorised by supplier
PCM Tooling (UK)
Address:
825 The Ridge
St Leonards-on-sea
TN37 7PX
UK
Telephone: (UK) +44 1424 753174
http://www.pcmtooling.co.uk
Our RSS feed for news from PCM Tooling (UK)
Request to receive our free email newsletter each week
Listing of all 15 news releases from PCM Tooling (UK):
Bar puller saves CNC lathe space
User application article A bar puller for CNC lathes works directly from a coolant supply, needs less than 2 bar of pressure and can pull bars ranging from 3-105mm with no adjustments.
News from PCM Tooling (UK) ( 6 February 2008)
Clamp small-shank tools in collets
Collet clamping nuts enable users of through coolant drills to fully exploit their through coolant advantages by allowing the tools, down to 3mm shank diameter, to be clamped into ER 11 collets.
News from PCM Tooling (UK) (18 September 2006)
Driven and static toolholders fit Nakamuras
A range of high precision driven and static toolholders to fit the Nakamura WT100 range of CNC mill/turn centres offer significant advances in productivity and a reduction in part manufacturing costs.
News from PCM Tooling (UK) (31 March 2006)
System clamps tools down to 2mm precisely
Advantage of a tool holding system is it can clamp tools as small as 2mm diameter securely and precisely, a feat which cannot be achieved by heat shrink devices and toolholders.
News from PCM Tooling (UK) (20 March 2006)
High performance multi-tool heads up productivity
High performance multi-tool heads raise productivity on transfer and special purpose machines, multi-spindle automatics, turning centers and many other applications.
News from PCM Tooling (UK) (20 March 2006)
Thread whirling cuts titanium threads quicker
Whirling heads use multi inserts in a high speed rotating head to cut screws in titanium and stainless steel quickly to precise tolerances - faster than using traditional single point methods.
News from PCM Tooling (UK) (20 March 2006)
High precision collets have bores down to 0.2mm
An extended range of collets manufactured to very high precision, achieving accuracies of less than 2 microns TIR when holding drills and reamers in a collet chuck tool combination.
News from PCM Tooling (UK) (20 March 2006)
PCM to distribute cutting tool balancing machines
To make the balancing of tool assemblies quick and simple using existing operators, PCM Tooling (UK) have been appointed sole UK agent for Balancing Systems, Italy.
News from PCM Tooling (UK) (20 March 2006)
Cutting tool balancing machine is easy to use
An easy to use spindle tool balancing machine allows machine operators or toolsetters to balance tool assemblies to standards as precise as G1 at the spindle speeds specified in ISO 1940.
News from PCM Tooling (UK) (16 March 2006)
Precision toolholders benefit many lathe users
Precision toolholders for Star turret turning centres offer significant benefits for users of Colchester, Hardinge, Mori-Seiki, Victor, and other machines fitted with VDI Star turrets.
News from PCM Tooling (UK) (22 April 2005)
Tools changed on mill/turn without removing driver
Tool holding system for mill/turn centres allows a tool change to be made in a few seconds, without having to remove the driven tool from the machine turret.
News from PCM Tooling (UK) (13 April 2005)
The flexible tooling system
PCM offer a Flexible tooling system from Zurn,that allows the use of more cutting tools on machines with peripheral tool turrets, sub spindles and twin turrets.
News from PCM Tooling (UK) ( 3 February 2005)
PCM Tooling (UK) appointed agent for MBM tooling
PCM Tooling (UK) have been appointed sole UK agents and distributors for the range of high precision modular tooling designed and produced by MBM Modular Tooling Systems AG, Switzerland.
News from PCM Tooling (UK) (17 March 2004)
Need More Production from your Lathe?
The Grippex Bar Puller Grippex II works directly from the machine's coolant supply, needing less than 2 bar of pressure.
News from PCM Tooling (UK) ( 7 January 2003)
Bar puller reduces lathe downtimes
A revolutionary type of bar puller is said to substantially reduce component production times and feeds bar within 1,5 to 2s after the previous parting off and spindle stop operations. .
News from PCM Tooling (UK) ( 7 January 2003)
