Product category:
Maintenance planning, services and equipment
News Release from: Procter Machine Guarding | Subject: Access platforms
Edited by the Manufacturingtalk Editorial
Team on 29 September 2004
Access platforms cut costs for
repetitive checks
Access platforms cut the cost of maintenance and improve safety when working at height when compared with repeatedly erecting and dismantling, for example, towers or scaffolding.
Within the manufacturing and process industries, huge efforts have been made in recent years to streamline production, optimise processes and, thereby, minimise production costs Nonetheless, in the present economic climate there is still a need to reduce overheads, so many companies are seeking ways to cut their maintenance spend
This article was originally published on Manufacturingtalk on 22 Jun 2005 at 8.00am (UK)
Related stories
How to comply with Work at Height Regulations
Jeremy Procter describes how permanent access platforms can be a cost-effective way to comply with many of the requirements of the new Work at Height Regulations.
How to comply with the Work at Height Regulations
This article explains what can be done to help comply with the new Work at Height Regulations within an industrial environment.
With large process and manufacturing plant, maintenance access is often gained by means of scaffolding - either of the traditional or tower type - or with mobile powered access platforms.
But few maintenance and facilities managers appreciate the true cost of these methods.
For example, taking into account the time to obtain a scaffold from an outside contractor or from within the company's own stores, plus the erection time, disruption at floor-level while the scaffold is in place, and the time to dismantle and return the scaffold, this approach is relatively expensive.
Further reading
Modular guard system suits any factory layout
Machine guarding components can be installed, taken down and re-installed without modification, to suit any factory layout offering significant lifetime cost reductions and labour-savings.
Modular enclosures are the best place for robots
Modular machine guarding system is quite probably the simplest, most cost-effective and visually attractive way of constructing and reconfiguring an enclosure around a robot installation.
Knowing EN 953:1998 for fixed and movable guards
Any machine placed on the market within the EU must be CE marked in accordance with the Machinery Directive - and includes machinery that is built in-house for use in-house, says Jeremy Procter.
It is estimated that if a scaffold has to be erected on three or more occasions to gain access to plant, it usually would have been cheaper to have had bespoke access platforms constructed and installed.
If suitable platforms, walkways and fixed ladders are in place, no time is needed to assemble the means of access, and the labour requirement is often reduced from two or more down to one.
There is also no disruption to production caused by scaffolding obstructing access at floor level, and bespoke access platforms often provide better access than tower scaffolding because they can be designed to reach over and around plant.
Moreover, in the case of emergency maintenance following an unplanned stoppage, access can be gained immediately so that downtime is minimised.
In addition, companies that have installed access platforms often find that easier access means that maintenance takes place more frequently, leading to higher quality production with more consistent output.
With the new Work at Height Regulations expected to be in force by the end of 2004, employers should also be aware that access platforms will help them to comply with the latest requirements.
Safety is not compromised when access platforms are used, as guard rails are designed at the outset and permanently fixed in position (according to data from the Health and Safety Executive, around 50 per cent of fatalities involving machinery are associated with maintenance and, in 2001/2002, 68 people died and nearly 4000 suffered a serious injury as a result of a fall from height in the workplace).
Aside from reducing the cost of maintenance and improving safety, custom-designed access platforms can also provide the optimum location from which to control processes, view production or replenish hoppers of raw materials.
Procter Machinery Guarding has over 30 years of experience of supplying bespoke access platforms.
Customers are offered a free site survey, after which a quotation is prepared that includes the costs of designing, manufacturing and installing the platforms, ladders, guard rails and associated hardware to the customer's specification.
All designs are completed in accordance with the requirements of the EEMUA (Engineering Equipment and Material Users Association) as well as all applicable British and European standards.
CAD (computer-aided design) is used to ensure that the designs are highly accurate, which also helps the installation to be completed as quickly as possible.
The installation can be scheduled to take place at a weekend or during a planned maintenance shutdown so as to avoid disrupting production.
Procter Machinery Guarding has its own teams of experienced fitters that can travel anywhere in the UK and Ireland.
To discuss any requirements for access platforms, either for existing plant or new projects, please contact Procter Machinery Guarding. Request a free brochure from Procter Machine Guarding ...
• Procter Machine Guarding: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
