Product category:
Inspection and testing (non-metrology)
News Release from: Peak Production Equipment | Subject: Interface device
Edited by the Manufacturingtalk Editorial
Team on 24 April 2007
Fast connect for instrumentation and
test devices
The Peak Group has introduced the G12 Mass InterConnect which offers a low-profile solution for rapid connectivity between instrumentation and devices under test.
The G12 Mass InterConnect from Virginia Panel Corporation, available exclusively in the UK from the Peak Group, offers a low-profile solution for rapid connectivity between instrumentation and devices under test With multiple interconnection options in a modular, re-configurable interface device, the G12 is ideal for use in commercial, contract manufacturing, automotive, and other high-volume testing environments
This article was originally published on Manufacturingtalk on 4 May 2007 at 8.00am (UK)
Related stories
PCB testing for satellite navigation systems
Peak Production Equipment has supplied a IVU2-J test system to check that PCBs in satellite navigation, traffic data and vehicle tracking systems at Trafficmaster have been correctly manufactured.
Systems test aero engine controls
Three production acceptance test rigs and three assembly test rigs, which are supported by three interface test adaptors, play a key part in jet engines' electronic control systems development.
Available in rack-mounted and table-top configurations, the G12 features an aluminium platform to accommodate in-circuit test and other 'bed of nails' testing requirements.
Integrated guide pins and VPC's proven QuadraTrack engagement mechanisms provide precise lead-in, while pin and socket modules and contacts ensure reliable connections to over 20,000 mating cycles.
With 12 connector module positions for signal, coaxial/RF, power, vacuum, pneumatic, thermocouple, and fibre-optic contacts in multiple configurations, the G12 offers I/O options to meet virtually any connectivity requirement.
Configurable up to 2880 signal contacts (2400 with vacuum option), the G12 accepts all VPC 90 and 2100 Series connector modules.
The unit is designed to perform in a variety of environments, and the G12 engagement handle can be re-positioned in 90 deg increments to satisfy different mounting requirements.
The 3U height (approximately 4U with slides) makes it ideal for rack use, as well as providing a low-profile platform for table-top test applications.
The rack-mount versions are available with slide mechanisms that allow quick access to instrumentation and wiring while supporting fixtures up to 81 kg in weight.
The platform is removable for transport and is available in different lengths to support varied fixture sizes.
When combined with VPC's QuadraPaddle signal contacts and modules, the G12 reduces integration time by allowing use of industry-standard 2.54mm pitch COTS connectors, cable assemblies and other interconnect products.
In addition to being the exclusive UK agent for VPC mass interconnection systems, the Peak Group also supplies complete test solutions which integrate these interfaces with drive electronics, electromechanical subsystems and test fixturing.
• Peak Production Equipment: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
