Product category:
Control systems, panels, HMIs, interfaces, screens
News Release from: Paragon Alliance | Subject: CD1000
Edited by the Manufacturingtalk Editorial
Team on 29 May 2002
Controller designed for multi-zone usage
The CD1000 from CD Automation has been specially designed for multi-zone applications such as plastic and glass manufacture.
The CD1000 from CD Automation has been specially designed for multi-zone applications such as plastic and glass manufacture Recently launched at the Mtec exhibition at the NEC, this fully digital product has current ranges from 3.5A to 110A and comes complete with universal input and firing modes
This article was originally published on Manufacturingtalk on 11 Apr 2006 at 8.00am (UK)
Related stories
Thyristor power controllers get diagnostics
The addition of heater break alarm across a range of thyristor power controllers provides the user with alarm and diagnostic information such as partial or total load failure and SSR failure.
Panel interface enhances power control monitoring
Panel mount interface provides real time monitoring and diagnostics of behind the panel SCR's/thyristor power controllers.
Each zone unit is connected together by a flat cable assembly which includes the auxiliary power supply, heater break alarm and RS485 communications, resulting in a significant reduction in wiring.
Connection between an HMI and the Thyristors is achieved via the built in RS485 communication protocol, leaving the user to connect only the input and load wires.
All firing modes, including phase angle with soft start, are standard on the CD1000 and can be reconfigure on-line via the RS485 comms without the need to power down the unit.
Full diagnostic functionality is also available across the range, giving feedback of load or Thyristor failure either from LEDs on the unit facia or remotely across the RS485 communication link.
The common digital design of the CD1000 combined with the communication facility means the user is able to remotely monitor the status, calibrate or reconfigure each unit independently.
Whether it be calibrating zero/span, changing the heater break sensitivity, modifying the power factors between units or simply reading the current value, it can all be done without leaving your PC.
The CD1000 is just one of the new fully digital family of Thyristor Power Controllers from CD Automation now available in the UK from Paragon Alliance Limited.
• Paragon Alliance: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
