Product category:
Electrical systems
News Release from: Paragon Alliance | Subject: Power controls for SWIR lamps
Edited by the Manufacturingtalk Editorial
Team on 13 June 2002
Power controls solve short wave infrared
dilemma
Short wave infrared (SWIR) lamps are commonly used in the heating and processing of such materials as plastics, glass, metals, ceramics and paper.
Short wave infrared (SWIR) lamps are commonly used in the heating and processing of such materials as plastics, glass, metals, ceramics and paper SWIR lamps have the advantage of transmitting high temperatures to localised areas with minimal heat dissipation
This article was originally published on Manufacturingtalk on 28 May 2002 at 8.00am (UK)
Related stories
SSRs and thyristors offer time and money savings
One of Europe's leading manufacturers of SSRs and thyristors, is now making its latest products, with 23 current rating steps, available to the UK.
Controller designed for multi-zone usage
The CD1000 from CD Automation has been specially designed for multi-zone applications such as plastic and glass manufacture.
Due to the lamps low inertia it can respond very quickly to power load demands and provides a safe, cost effective means of heat treatment.
The lamps low inertial however also causes the main problem of using SWIR elements, that of high initial inrush current when cold.
When the lamp is cold it exhibits low resistance which results in currents of up to 6 times the nominal being drawn, without attention this phenomenon could cause the controlling Thyristors fuse to fail.
Further reading
Thyristor controls complex loads
Universal thyristor can control 3-phase resistive, inductive, transformer and complex loads (such as silicone carbide and super Kanthal) while providing feedback and diagnostics.
Thermal datalogging improves oven performance
A high precision measuring and logging system benefits product quality control, productivity and minimises fuel costs in operating conveyorised or batch process ovens.
Software makes power controllers more flexible
The utility software from CD Automation makes a new digital range of Solid State Relays and Thyristors the most flexible family of power controllers on the market.
The common solution to this problem is to employ a power attenuation technique called phase angle thyristor firing that controls the power by adjusting the portion of the ac supply cycle allowed for conduction.
The more power required the more the conduction angle is advanced until 100% of the cycle is conducting power.
In phase angle mode the first complete cycle could cause a current surge and blow the fuse, so a current limiting technique must also be employed.
Current limit allows the phase angle proportioning to increase from zero until a preset current limit is reached, then the angle is regulated to keep the current within safe limits.
Using phase angle with current limit is an effective method of controlling SWIR lamps but has four main drawbacks: * Interference and harmonics could be generated by the rapid switching in mid-cycle which may require filtering to meet with local regulations.
* Due to the inertia of the current transformer and other associated passive components in the current limit circuitry it can take up to 100ms for this current protection to become effective.
* The basic principle of phase angle is to reduce the voltage from the thyristor, which in turn reduces the energy to the lamp and increases the time taken to reach operating temperature.
Abnormal current levels will remain until the lamps resistance increases with temperature; therefore reducing the voltage results in prolonged elevated currents.
* For the lamp to operate effectively it needs to be switched at full power and as quickly as possible to ensure the element does not get cold between cycles.
As you can see from using Phase Angle and Current Limit this cannot be achieved.
CD Automation have used their 20 years experience in power control design and manufacture to develop a new digital family of Solid State Relays and Thyristors.
After extensive testing and experience in the field of SWIR lamps they have designed a range of products that reduce the level of inrush current and allows the user to select the firing mode that best suits the application.
A computerised sizing programme has also been developed that enables Paragon Alliance to specify the correct product that will overcome the complexities of controlling SWIR lamps, while maximising their efficiency.
• Paragon Alliance: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
