Product category:
Electronics manufacturing: quality control equipment, software
News Release from: Prior Scientific | Subject: LF100 Laser Focus Module
Edited by the Manufacturingtalk Editorial
Team on 07 July 2004
Laser focus module removes tedious
routines
High magnification inspection of reflective specimens, such as semi-conductor wafers, was tiring because of the constant adjustment of focus position, but a laser focus module can do it now.
High magnification inspection of reflective specimens, such as semi-conductor wafers, is inherently tiring because of the constant need to adjust the focus position Prior Scientific Instruments Limited has developed an innovative product to eliminate this particular problem
The LF100 Laser Focus Module constantly monitors the focal position of the microscope and makes adjustments through a motorised focus to maintain a perfect image of the specimen.
Once installed, the system stores settings for up to five objective lenses meaning little or no future adjustment is required.
The high performance microprocessor used to monitor and adjust the focus removes the requirement for user adjustable gain controls.
This therefore minimises the amount of operator involvement required and improves the ergonomics of the inspection process. Request a free brochure from Prior Scientific ...
• Prior Scientific: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
