Product category:
Food and drink manufacturing: packaging and bottling equipment
News Release from: Poeton Industries | Subject: Apticote 450 coating
Edited by the Manufacturingtalk Editorial
Team on 11 December 2002
Coatings solves sticky packaging problem
A specialised coating has helped solve a sticky packaging problem for one of the world's top-ten suppliers of consumer packaging and thin wall plastic containers for the food industry.
A specialised coating from Poeton Industries, a world leader in surface coating technology, has helped solve a sticky packaging problem for Rexam, one of the world's top-ten consumer packaging suppliers and a leading European supplier of thin wall plastic containers for the food industry At its factory in Yate near Bristol in the UK, Rexam has developed a proprietary process to mould high volume trays using PET, an advanced packaging material that is specified by major food brands because its clear finish allows consumers to see the product inside the pack
This article was originally published on Manufacturingtalk on 20 Apr 2004 at 8.00am (UK)
Related stories
Filtration system eliminates hard chrome pitting
A three-year project to develop a low-effluent hard chrome plating plant has dramatically improved the quality of the hard chrome plating by introducing a high-pressure filtration system.
Powder coating plant is jointly funded
A jointly funded automated powder coating plant will guarantee a trailer builder an output of in excess of 50 towbars an hour, allowing the company to offer customers a two-day delivery.
However, whilst PET has obvious advantages for Rexam customers it can be difficult to process in high volume moulding machines, being both abrasive and sticky.
Its abrasive properties cause aluminium moulds to wear quickly and its stickiness makes it difficult to remove trays from moulds - problems that have a seriously affect on high volume production.
Also, because trays stick together when stacked, de-nesting is also difficult and slows down the customer's production lines.
Further reading
Metal matrix coating system produces perfect bore
A metal matrix coating system specifically developed for high performance automotive applications such as engine block cylinder bores and engine liners, helped out at Monaco.
Surface coating availablity improved in Ireland
A range of surface coating systems has now been made available in Northern and Southern Ireland following the setting up of an agency in County Kildare.
Coatings exhibit excellent non-stick properties
A UK surface coating company has signed an agreement to act as sole UK licensee for a range of tough and flexible coatings with excellent non-stick and release properties.
Both problems were experienced recently at Rexam on a line producing trays for a major food product line.
To overcome the de-nesting problem Rexam had been grit blasting the mould to roughen the surface, and blending an expensive migrating wax additive with the PET.
Whilst this approach improved de-nesting it didn't solve the mould wear problem and, as the additive left a residue, the mould also needed regular cleaning.
At this stage the issue of pack clarity became secondary to the high volume needs of the customer and Paul Hawkins, technical manager at the Yate site, called in surface treatment specialist Poeton Industries to advise on coatings, primarily to improve the long-term wear characteristics of the moulds.
Poeton's engineers recommended a coating of Apticote 450 to reduce wear in the mould cavity; and bead blasting rather than grit blasting as a more effective pre-treatment for use with Apticote 450.
Initial trials were carried out on a 120-cavity drum mould with twenty cavities coated.
After six weeks of running twenty-four hours a day and seven days a week there were no signs of wear in the coated cavities and Rexam were sufficiently impressed to have the whole tool coated.
Whilst the result was good news for high volume production, the real surprise came when Rexam ran trials of the coated cavities with reduced amounts of the de-nesting additive in the PET.
With only half the amount of the expensive additive (the optimum result) de-nesting was significantly improved and additive costs reduced.
The process now produces 1.5 million of the twin-cavity trays each week to feed a production line that is operating every day of the week.
Commenting on the project, Paul Hawkins says: "Poeton coatings proved the ideal solution for the wear problems we encountered with this combination of long running, high-volume process and abrasive, sticky material.
"The improvements in de-nesting and the reduction in additive use is a very welcome bonus!".
• Poeton Industries: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
